View Full Version : Sandpaper sources
jim gossage
04-18-2008, 5:50 AM
Hello all,
i have an open end 18" drum sander and a 6x48" stationery belt sander, and am looking for recommendations on good quality sandpaper at reasonable prices. in the past, i have bought grizzly belts for the belt sander. the belts were priced well but the splice was a bit proud and jarred the wood each time it went by (regardless of the speed), which diminished the quality of the sanding. any advice would be appreciated. thanks
Jim Becker
04-18-2008, 9:04 AM
Many folks recommend Klingspoor.
John W. Willis
04-18-2008, 4:36 PM
These guys had great prices,fast reasonable shipping on my "J" weight rolls.
http://www.onlineindustrialsupply.com/?google-sandpaper&gclid=CIrFyuO65ZICFQurPAodMCHFgQ
Reed Wells
04-18-2008, 4:42 PM
What Jim said.
Curt Harms
04-19-2008, 3:16 AM
I ordered belts for the cute lil P-C belt sander and 3" wide for the drum sander from these guys (https://commerce.riverweb.com:8003/%28SessionID=7eb79cb2808522c7f1913add7276e1bb%29/shop.html). Service was quick, prices were good(less than a buck a belt for the P-C) and abrasives seem fine
HTH
Curt.
Gene E Miller
04-19-2008, 8:08 AM
These guys had great prices,fast reasonable shipping on my "J" weight rolls.
http://www.onlineindustrialsupply.com/?google-sandpaper&gclid=CIrFyuO65ZICFQurPAodMCHFgQ
I second this source I have had excellent results from
them myself.
Gene
Bob Rufener
04-19-2008, 11:02 AM
I have bought from this site before and was well satisfied with quality and service.
http://barbkat.com/index.html
jim gossage
04-20-2008, 5:38 AM
I have bought from this site before and was well satisfied with quality and service.
http://barbkat.com/index.html
Bob,
Were the belts from that site butt jointed and taped?
thanks for your help guys.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.