View Full Version : Save wood handles on screwdrivers?
Doug Hobkirk
04-14-2008, 7:52 PM
Hey, these are primitive screwdrivers! They have great feel but the wood handles are hurting big time. Is there anything I can do?
Jim Koepke
04-14-2008, 7:59 PM
Hey, these are primitive screwdrivers! They have great feel but the wood handles are hurting big time. Is there anything I can do?
I have seen an article on making new scales for the handles. Not sure if it was here or at one of the other sites. I think they are called "perfect handle" screw drivers.
jim
Joe Chritz
04-14-2008, 8:33 PM
Check out a knife building supply webpage. I used Koval knives a lot. There are different rivets available to attach handles. I often made my own from threaded brass rod and solid brass.
Make some new scales. epoxy on, attach rivets and shape to suit.
Joe
Tim Leo
04-14-2008, 8:36 PM
Try this article:
http://www.wkfinetools.com/contrib/jThompson/restore/perfHandle/perfHandles1.asp
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.