Jack Mincey
04-09-2008, 11:35 AM
Here are a couple bowls just finished. The first one is a save I made on a maple bowl made for the person that gave me the wood. It was one of the maple type trees that has dark red leaves in the summer. When I cut the blank I knew that the bark inclusion was going to be a problem. Took some CA to hold it together, but it turned out nice. 6" dia. x 4 1/4" You can see how much of the bowl the inclusion went thru in the second picture of the first bowl. The second bowl was turned by one of my Ninth grade students. It is turned from a black locust burl he found. He sanded the edge so much that it makes the thickness look uneven, but it was vary even until he sanded it. He has another large bowl turned from it that is drying.
Jack
http://usera.imagecave.com/flyrod444/100_0710-copy.jpg
http://usera.imagecave.com/flyrod444/100_0712-copy.jpg
http://usera.imagecave.com/flyrod444/100_0715-copy.jpg
http://usera.imagecave.com/flyrod444/100_0716-copy.jpg
Jack
http://usera.imagecave.com/flyrod444/100_0710-copy.jpg
http://usera.imagecave.com/flyrod444/100_0712-copy.jpg
http://usera.imagecave.com/flyrod444/100_0715-copy.jpg
http://usera.imagecave.com/flyrod444/100_0716-copy.jpg