Matching the "Jet white" paint on Jet power tools

[Joseph Ragsdale]

I've tried several different white Rustoleum paints, but I haven't found one that matches the "Jet white" on Jet's white colored power tools.

Any suggestions on a paint that matches? This is for touch up on some spots where the paint is worn away on cast iron parts.

[Chris Jenkins]

Try calling the tech support. I know a few of my PM machines came with a little can of touch-up at one point. I'm sure if you talk nice to them they might have something for you?

Chris

[Joseph Ragsdale]

So when you bought your Powermatic tools, they came with the can of paint?

That's a nice touch.

[Byron Trantham]

Remove one of the parts and take it one of the Borgs and let them "color match" the paint.

[Randal Stevenson]

You could use off white, tan or Grizzly green. According to WMH group, it matches and violates their trademark.

Saw this article some time back
http://www.fdmonline.com/ViewNews.aspx?id=25778

[Joseph Ragsdale]

I called the WMH Tool Group tech support number and they sell white touch up paint for $20 including shipping. Not a bad deal.

Thanks for the tip. Would have been easier to go through them first haha :D

[Deck Reagan]

Krylon Glossy Ivory is almost a dead on match.

I actually have a brand new can of spray paint I got from Jet to do some touch ups so they do have paint.

Deck

[Kyle Kraft]

I use Rust Oleum Canvas White....it's so close, I can't tell the difference.

[Mark Berenbrok]

I have a little can that came with my Jet jointer a few years ago. I since sold it. Send your address and I'll drop it in the mail.

[Jim Becker]

Krylon Ivory. 'Matches the Delta "Grand Edition" color, too...

[Wayne Cannon]

They sent me a small bottle when I received a tool with some chipped paint. I'm sure the local paint store could make up a nice spray can of matching paint.