harry strasil
04-08-2008, 12:03 AM
Remember this Outfeed support for my planer?
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/outfeedsupport003.jpg
Here it is after some refinement, slots and knobs, set up at the end of my table saw.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw03.jpg
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw02.jpg
And the new Infeed support for the table saw. It attaches to the table saw with 2 1/4 inch bolts and washers and wing nuts.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw04.jpg
Infeed support, table outfeed extension and outfeed support all set up to rip some plywood.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw05.jpg
And as this is the first time I have tried drilling holes for shelve brkts, I needed a way to get the holes spaced right. The salvage pile yielded a piece of hardboard pegboard. Used some bolts to postion a scrape piece of plywood to it so I could fasten it with screws.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/holes01.jpg
Notice the high tech drill stop. LOL
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/outfeedsupport003.jpg
Here it is after some refinement, slots and knobs, set up at the end of my table saw.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw03.jpg
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw02.jpg
And the new Infeed support for the table saw. It attaches to the table saw with 2 1/4 inch bolts and washers and wing nuts.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw04.jpg
Infeed support, table outfeed extension and outfeed support all set up to rip some plywood.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/tsaw05.jpg
And as this is the first time I have tried drilling holes for shelve brkts, I needed a way to get the holes spaced right. The salvage pile yielded a piece of hardboard pegboard. Used some bolts to postion a scrape piece of plywood to it so I could fasten it with screws.
http://img.photobucket.com/albums/v81/irnsrgn/bsmnt%20shop/holes01.jpg
Notice the high tech drill stop. LOL