Brian Shutter
03-27-2004, 12:14 PM
I am in the process of designing a rolling storage cabinet but need some help. In the future I'll be buying a PC7518 but I need some diminsions of the router now so I can finish my drawing.
I need to know the height of the router (I realize there is a range of heights depending on where the base is in relationship to the motor). I also need to know the diameter of the stock base. I believe the measurement from outside of one handle to the outside of the other handle is approximately 11 1/2 inches. Is that right?
I did check the PC website but they didn't give much info on the housing specs. I think these numbers will answer all my questions. Thanks for your help!
Brian
I need to know the height of the router (I realize there is a range of heights depending on where the base is in relationship to the motor). I also need to know the diameter of the stock base. I believe the measurement from outside of one handle to the outside of the other handle is approximately 11 1/2 inches. Is that right?
I did check the PC website but they didn't give much info on the housing specs. I think these numbers will answer all my questions. Thanks for your help!
Brian