Festool vac hose and power cord?

[Rob Will]

Does Festool sell a vac hose with a power cord made into the hose?

If not, what is the best way to bundle the two together?

Anybody ever tried a nylon sleve?

Thanks,
Rob

[David Eldridge]

Not in the USA. :( Underwriters Lab won't allow the cord to be in the vacuum hose. I bought a package of small velcro strips at home depot and just attached the cord to the hose with velcro strips. Good luck. :)

[Greg Funk]

You can buy hose clips 85848 from Fein. Coastal Tool sells them http://coastaltool.com/cgi-bin/SoftCart.exe/a/fein/turbo-i-accessories.htm?L+coastest+lmns5274ffca48ca+120743 2155

Greg

[fred woltersdorf]

here's what i did, i got the idea from a posting on the festool owner's group. the sleeve is woven plastic and is used to manage cables. the brand is Gorilla Sleeve.

[Per Swenson]

Rob,

Seeing as the plugit cord fits everything but the large routers,

but the large router plugit does fit every thing....

I just zip tied the 1400 plugit to the hose.

Per

[Russ Massery]

Ditto on Per's response. All my cords except one is still in the box.

[Mick Zelaska]

I just used nylon ties to attach the power cord to the vac hose. Wish the TS-55 used the same cord as all the other Festool tools I have.

[Peter Quinn]

I''m using the velcro strips from the depot as my vac gets used with festool, bosch, makita and PC tools and the festool cords definitely don't fit other brands.

[Jim Kirkpatrick]

I find these velcro straps (http://www.amazon.com/Velcro-90302-4x36-Black-Strap/dp/B000BQLZB6/ref=pd_bbs_2?ie=UTF8&s=hi&qid=1207425916&sr=8-2) work well with Festool hose and cord. They're also handy around the shop for other uses too. I got mine at Officemax

[jason lambert]

I posted that on the Festool owners group been using it 2 years works great and unlike Festool's hose that runs the power cord in the inside I don't loose hose diameter and it protects the hose and makes it slid better over the guides. Here are all the details:

http://www.forcemachinery.com/festoolmods.htm

[Eric DeSilva]

I think I saw on the Festool forum that a cut up innertube--make little donuts--works well for this...