Wayne Bitting
04-04-2008, 12:23 PM
I’m finally building some workshop cabinets to store all of my tools so that all of the cases aren’t just stacked on one another. The drawers I’m going to be doing are about 16” wide by 26” deep. I know that some of the tools and cases can be on the heavier side (like the fixed and plunge router set) so I planning on ½” ply for the drawer bases. Can I get away with using ½” ply for the drawer sides or do I need to go with 3/4”.
Also I’m going to try the hot melt edge banding for the first time. About how long does it take to heat up and how long do you have before the glue hardens?
Thanks!
Also I’m going to try the hot melt edge banding for the first time. About how long does it take to heat up and how long do you have before the glue hardens?
Thanks!