richard poitras
04-02-2008, 5:54 PM
Dear all,
this is your chance to participate in this outstanding seminar about Veneering.
Bill Hull, from Marc Adams School, will come to Auburn (MI), and give one day seminar with lecture and demonstration about Veneering.
Date: April 5th, 2008 - Saturday - 8 a.m. – 5 p.m.
Location: Grace Lutheran Church Gym - 303 Ruth St, Auburn - MI - 48611
Seminar Cost: $50 MWA members (Midland Woodworkers Association), $60 for non-members
- Lunch provided on site is included in price
- Handout & Name tags provided
- Door prizes will be giving away during the seminar
- Some sponsor will have veneering related material to be sold
Seminar Topics to be covered
A: Introduction
B: Veneer
1) How it is cut from log
2) Types of cuts
3) Types of figure
4) Purchasing
5) Handling and storage
C: Preparation of tools
1) Veneer saw
2) Straight edge
3) Sanding block
D: Principles of clean cuts
E: Panel balancing
F: Panel specifications
G: Basic veneer matching
1) Sequence
2) Pattern drift
3) Refraction
4) Slip match
5) Book match
6) Slip and turn
7) Seaming veneers
8) Taping
H: Sub lays
I: Adhesives
J: Pressing
1) Manual pressing
2) Vacuum systems
3) Pressing demonstration
K: Decorative veneer matching
1) Lay out of patterns
2) Cuts of veneers
3) Diamond and Box
4) Reverse Diamond & Box
5) Sunburst
L: Cross banding and inlay borders
M: Edge treatments
1) Self Edge
2) Overlaying solid wood
3) Sequencing
N: Curved panel work
1) Substrates
2) Form building
3) Vacuum Pressing
P: Parquetry
this is your chance to participate in this outstanding seminar about Veneering.
Bill Hull, from Marc Adams School, will come to Auburn (MI), and give one day seminar with lecture and demonstration about Veneering.
Date: April 5th, 2008 - Saturday - 8 a.m. – 5 p.m.
Location: Grace Lutheran Church Gym - 303 Ruth St, Auburn - MI - 48611
Seminar Cost: $50 MWA members (Midland Woodworkers Association), $60 for non-members
- Lunch provided on site is included in price
- Handout & Name tags provided
- Door prizes will be giving away during the seminar
- Some sponsor will have veneering related material to be sold
Seminar Topics to be covered
A: Introduction
B: Veneer
1) How it is cut from log
2) Types of cuts
3) Types of figure
4) Purchasing
5) Handling and storage
C: Preparation of tools
1) Veneer saw
2) Straight edge
3) Sanding block
D: Principles of clean cuts
E: Panel balancing
F: Panel specifications
G: Basic veneer matching
1) Sequence
2) Pattern drift
3) Refraction
4) Slip match
5) Book match
6) Slip and turn
7) Seaming veneers
8) Taping
H: Sub lays
I: Adhesives
J: Pressing
1) Manual pressing
2) Vacuum systems
3) Pressing demonstration
K: Decorative veneer matching
1) Lay out of patterns
2) Cuts of veneers
3) Diamond and Box
4) Reverse Diamond & Box
5) Sunburst
L: Cross banding and inlay borders
M: Edge treatments
1) Self Edge
2) Overlaying solid wood
3) Sequencing
N: Curved panel work
1) Substrates
2) Form building
3) Vacuum Pressing
P: Parquetry