SawMill Creek Members With Laser Engravers

[Chris Oakley]

I've agreed to turn a couple pen sets for a Rotary fundraising auction. I would like to give them in a box engraved with the Rotary emblem. Where could I find someone to help me? Anyone on this board interested? What should I expect to pay? If this is inappropriate, please excuse me.

[John Miliunas]

I've agreed to turn a couple pen sets for a Rotary fundraising auction. I would like to give them in a box engraved with the Rotary emblem. Where could I find someone to help me? Anyone on this board interested? What should I expect to pay? If this is inappropriate, please excuse me.

Well, gee. This might be a bit of a stretch, but maybe you could try the sponsor of this here site. :D Keith has posted some of his work here and I know that some other members have been the recipients of some of it, as well. Just go to: http://www.northwindassociates.com/ . :cool:

[Keith Outten]

Chris,

Below is a list of woodworkers who own Laser Engravers here at the Creek. This list was last updated on September 27, 2005.

Click on any name below to go to their members page, you can then send them an Email or Private Message.

Redge Henline - Arlington, TX (http://www.sawmillcreek.org/member.php?u=2287)
Ken Nelsen - Las Vegas, NV (http://www.sawmillcreek.org/member.php?u=1540)
Mike Wallis - Fresno CA (http://www.sawmillcreek.org/member.php?u=2206)
SteveKrim - Romeo, MI (http://www.sawmillcreek.org/member.php?userid=875)
George Skinner - Charles Town, WV (http://www.sawmillcreek.org/member.php?u=1178)
George Perzel - Rochester, NY (http://www.sawmillcreek.org/member.php?userid=2842)
BobRacine - Centeral Virginia (http://www.sawmillcreek.org/member.php?u=1826)
Kathy Hassler - Walla Walla, Washington (http://www.sawmillcreek.org/member.php?u=1901)
Thomas Hempleman - Carroll, Ohio (http://www.sawmillcreek.org/member.php?userid=2608)
James Stokes - Springfield, Mo (http://www.sawmillcreek.org/member.php?userid=3344)
Keith Outten - Gloucester Virginia (http://www.sawmillcreek.org/member.php?userid=2)
Michael McDuffie - Des Moines, WA (http://www.sawmillcreek.org/member.php?userid=4027)
Laura DeMeyer - Colona, Illinois (http://www.sawmillcreek.org/member.php?u=2998)
Gary Shoemake - New Jersey (http://www.sawmillcreek.org/member.php?userid=2827)
Hale Reider - Eastern Tennessee (http://www.sawmillcreek.org/member.php?userid=4063)
Michael Wells - Rainbow Valley, CA. (http://www.sawmillcreek.org/member.php?userid=2928)
Will Pote - Nogal, NM (http://www.sawmillcreek.org/member.php?userid=4072)
Mark Sipes - Gig Harbor, Washington (http://www.sawmillcreek.org/member.php?userid=4302)
Pete Simmons - Upper East Coast, FL (http://www.sawmillcreek.org/member.php?userid=3593)
Aleta Allen - Holton, Ks (http://www.sawmillcreek.org/member.php?u=4129)
Mike Sub - Slippery Rock, PA (http://www.sawmillcreek.org/member.php?u=3964)
Bruce Larson - New Braunfels, Texas (http://www.sawmillcreek.org/member.php?userid=3393)
Jeff Chumbley - Sacramento, CA (http://www.sawmillcreek.org/member.php?userid=3268)
Alan Young - Central Iowa (http://www.sawmillcreek.org/member.php?userid=4219)
Glenn Palhof - Crystal River, Florida (http://www.sawmillcreek.org/member.php?u=3883)
Abdul Baseer Hai - Ottawa, Canada (http://www.sawmillcreek.org/member.php?u=3990)
Ellen Crane - Irving, Texas (http://www.sawmillcreek.org/member.php?u=4290)
Al Curatolo - Colorado (http://www.sawmillcreek.org/member.php?u=4356)
Joe Hayes - Marion, IL (http://www.sawmillcreek.org/member.php?u=3966)
Matty McQuilkin - Sparta, Wisconsin (http://www.sawmillcreek.org/member.php?u=3363)
Jerry Allen - Tehachapi, CA (http://www.sawmillcreek.org/member.php?u=3814)
Linda Forte - Lancaster, PA (http://www.sawmillcreek.org/member.php?u=3904)
Chuck Burke - Maui, Hawaii (http://www.sawmillcreek.org/member.php?u=3052)
Lynn Kull - Royalton, Minnesota (http://www.sawmillcreek.org/member.php?u=2943)
Barbara Buhse - Levittown, NY (http://www.sawmillcreek.org/member.php?u=3690)
Robert Stremcha - Elroy, Wisconsin (http://www.sawmillcreek.org/member.php?u=4689)
Kim Maitland - Ft.Worth, Texas (http://www.sawmillcreek.org/member.php?u=4369)
Wes Hines - Tulsa, OK (http://www.sawmillcreek.org/member.php?u=4705)
Tom Cole - Great Falls, Montana (http://www.sawmillcreek.org/member.php?u=4505)
Rich Shepard - Salem, OR (http://www.sawmillcreek.org/member.php?u=4138)
Robert Alexander - Farr West, UT (http://www.sawmillcreek.org/member.php?u=4447)
Bruce Volden - SE South Dakota (http://www.sawmillcreek.org/member.php?u=4858)
Michael McDuffie - Des Moines, WA (http://www.sawmillcreek.org/member.php?u=4027)
Darren Coffell - Bend, OR (http://www.sawmillcreek.org/member.php?u=4855)
Dave Rawn - Southern Minnesota (http://www.sawmillcreek.org/member.php?u=4910)
Dave Strickler - York, PA (http://www.sawmillcreek.org/member.php?u=3501)
Lee DeRaud - Anaheim, California (http://www.sawmillcreek.org/member.php?u=4450)
Debbie Sweet - Tucson, AZ (http://www.sawmillcreek.org/member.php?u=3874)
Robert McCloughan - Susanville, California (http://www.sawmillcreek.org/member.php?u=5064)
Grant McFarland - Arvada, CO (http://www.sawmillcreek.org/member.php?u=5079)
Pete Andrew - Devon, U.K (http://www.sawmillcreek.org/member.php?u=4609)
William Desrochers - Quebec, Canada (http://www.sawmillcreek.org/member.php?u=4903)
Nick Adams - Fortville, IN (http://www.sawmillcreek.org/member.php?u=3878)
Ian Malings - Marlboro, NY (http://www.sawmillcreek.org/member.php?u=5285)
Jerry Kriegel - Belle Plaine, Iowa (http://www.sawmillcreek.org/member.php?u=3312)
Brent Perkinson - Orlando, Fl (http://www.sawmillcreek.org/member.php?u=5290)
Travis Shipman - Shreveport, LA (http://www.sawmillcreek.org/member.php?u=5089)
Joe Pelonio - Sammamish, WA (http://www.sawmillcreek.org/member.php?u=5230)
Guy Hilliard - Brampton, Ont. Canada (http://www.sawmillcreek.org/member.php?u=5587)
Gary Merrill - Lomita, CA (http://www.sawmillcreek.org/member.php?u=5296)
Kurt Sallaz - Bangor, Michigan (http://www.sawmillcreek.org/member.php?u=5738)
Nick Napier - Bedford, In (http://www.sawmillcreek.org/member.php?u=5445)
Rolf Brunner- Hot Springs, VA (http://www.sawmillcreek.org/member.php?u=5687)
Chris Cordina - Apple Valley, MN (http://www.sawmillcreek.org/member.php?u=5275)
Dave Kelly - Wooster, OH (http://www.sawmillcreek.org/member.php?u=5790)
Don Lyon - McKinney, TX (http://www.sawmillcreek.org/member.php?u=4958)
Dave Fifield - San Jose, CA (http://www.sawmillcreek.org/member.php?u=6058)
Dotte Courtney - Coon Rapids, MN (http://www.sawmillcreek.org/member.php?u=5527)
Mike Shauer - Hope B.C. (http://www.sawmillcreek.org/member.php?u=432)
Jim Walters - Leo.Indiana (http://www.sawmillcreek.org/member.php?u=6001)
Ed Lang - Troy, VA (http://www.sawmillcreek.org/member.php?u=3050)
Nate Sauder - Goodfield, IL (http://www.sawmillcreek.org/member.php?u=1028)
Wil Lambert - Racine, WI (http://www.sawmillcreek.org/member.php?u=6238)
Larry Alles - Bridgeton, MO (St. Louis) (http://www.sawmillcreek.org/member.php?u=6246)

Anyone who would like to have their name included in this list let me know, there are lots of inquiries each month from our members interested in laser engraving and it would be nice to have a complete list of our members who own lasers for SawMill Creek Members to contact for pricing information and advice.

[SteveKrim]

Keith,

That was awfully nice to include everyone in that list...

I have been trying different marketing approaches and nothing has really "Hit" yet... The one thing that I have done recently was to donate a black marble class picture for my kids' Montessori Silent auction. There were 9 classes and they raised around 1500.00 just on the tiles.... One of them went for 400.00 and I agreed to make a couple duplicates for what ever the high bid was on another. The point here is that I know there is a market and if people can see them - they see the value and beauty!


Steve

[Keith Outten]

Steve,

I hope your ebay listings are working. Just as a suggestion, right now is the time to contact any college or university bookstore in your local area and inquire about engraving diplomas. Frames for diplomas normally sell for $135.00 so an engraved diploma is a real bargain, it's unique and it is unlikely you will have any competition.

The graduation season is upon us :)

[Thomas Hempleman]

Keith...

This is my first post to this forum.

You can add me to your list of laser engravers that will take on job requests. I recently started my business and this site has been a big help. Although I have many years experience in graphic design and production, I've never worked "for myself" before and setting up this business has been seat of the pants flying. My biggest problems are marketing and pricing my products and services. It's tough coming up with a price when every job seems to be different. I've read through the various postings about pricing, but I'm still unsure.

I'm based in Carroll, Ohio (southeastern Ohio, close to Lancaster). Anyone needing something laser engraved or cut can contact me.

[George M. Perzel]

Hi Keith;
I'm in the Rochester, NY area and do a lot of laser engraving. Please add me to your list of laser engravers. Thanks
George M. Perzel

[James Stokes]

You can add me to the list too,
James Stokes
Springfield, Mo

[Michael McDuffie]

Please add me also,
Michael McDuffie
Lasart Engraving
Des Moines, WA
70W Epilog Legend24 with rotary fixture.

[Laura Zaruba]

I would also like to be added to the list.

Thank you!

Laura DeMeyer

[Gary Shoemake]

You can add my name to the laser list. I'm located in southern New Jersey.

Gary Shoemake

[Hale Reider]

We have a larger format laser, 24" X 36" and we are in Eastern Tennessee. Add us to the list. Hale Reider

[Keith Outten]

Those of you who are new to engraving take heart, it may seem like a long time to get your new business going but it will happen. In time your part-time income will easily exceed your day job and you will be faced with making the decision whether you want to make the transition to full-time engraver.

For woodworkers, adding laser engraving to your existing projects is the best way to get started. Engraving bowls, boxes, pens or whatever projects you normally enjoy will increase their value and possibly elevate your projects to another level. In time some experimenting with materials other than wood or incorporating them into your woodworking projects can also be beneficial. Of course you might also offer your new skills to your woodworking friends and don't forget that your new engraver will help you to manufacture great shop jigs and fixtures, some may even be marketable to the woodworking community.

I have found that commercial signs have been the most proffitable and for me the most enjoyable engraving work. I hope this thread helps those of you who are just starting out in some way.

[Michael Wells]

I feel so left out!!!! Keith, what happened to me??? I didn't make your list???
Dang, just like my parents...they used to move while I was in school and wouldn't tell me....I'd get off the bus and....sheesh! It would take me weeks to find them!!! Hehehe

Maybe we do need a full and comprehensive list of laser owners and their locations in here somewhere, huh? Maybe quite a few of the other creek patrons could use our services!
Michael

[Keith Outten]

Mike,

Sorry about forgetting to add you to the list but at 53 my memory isn't what it used to be :)

I started the laser engravers list in hopes that it would be helpful to SMC Members who were looking for engraving services. I'm now thinking that we need a master listing of skills for all of our members who might be in need of a special skill, process or service that someone in our membership may be able to fill. Everyone knows how I feel about advertising however I think promoting our community is a good thing. Possibly Aaron would have some thoughts about how we might put something together that will allow Members to list any special skills or equipment they have that they would like to share. Searching the public members list won't work since it doesn't search any keywords but maybe there is another way.

[Nick Adams]

If you would like I could possibly make a webspread. of our laser engravers + thier locations and contact information and host it as ? Not sure. Maybe aaron would allow me to use a subdomain of SMC. Something like http://www.Laserengravers.sawmillcreek.org and have it point to the page I make? If not I can make it a sub-domain of my own website. Would just rather it be for this group and easily found.



Should have my Epilog this week.
After all the work contacting the suppliers of lasers and such, someone pointed me to a near by laser owner looking to sell thier 1.5 yr old machine. And although I am not too keen on buying used electronics/equipment. i think I have found the better deal for my uses.

75watt Epilog Legend 32ex Rotary, Vector Table, Air Assist, Exhaust,
PLUS
Dell(cringe since i build computers.) Higher End computer with 21inch LCD 2.4ghz Intel p4 with 1gig of ram. 160gig hd a "pos" vid card With Corel Suite 12, Photograve, Photoshop, Office 2003, Microsoft xp pro, Adobe illistrator 10, and a few other oddball programs for 24,000$

All hours documented. Run time of all projects was under 30 hours. And total powered on time was under 80 hours. He has all documentation for everything. Plus i get his supplies~ Not a bad deal in my mind. His war. is still good for 3 months also.

[Mark Sipes]

Add me: Harbor Engraving


TroTec 17" x 29" 25 W

Gig Harbor, Washington


Mark

[Aleta Allen]

Please add me to your list also.]


Aleta Allen
Holton, KS

Xenetech 18x30

Thanks

[mike sub]

add me to the list also:


Mike Sub
slippery rock pa ( between pgh and erie)

[Bruce Larson]

I have an Epilog Legend 24EX 60 Watt. Also have a Multicam CNC Router and do sand carving.
Located in San Antonio Texas area.

[Jeff Chumbley]

Please add me also. I have an Epilog 24TT 45 watt.

[Alan Young]

As the list grows please add me

Alan Young 30 watt mercury
Central Iowa

[Glenn Palhof]

you my add my name to your list of laser regravers

thanks glenn

[Ellen Crane]

I've had my Epilog laser 35 mini for just over a week now and WE LOVE IT!!! Please add me to your list....

Ellen Crane - Irving Texas

[Al Curatolo]

You can add me to the list. We are located in Parker, CO and run an Epilog Legend 32 at 35 watts. Largest single piece can be 32"x20" but we specialize in GIANT multi-tile murals.

Al Curatolo

[Joe Hayes]

You can add me to your list. We have been doing awards, signs and industrial engraving with our laser for the last 4 years. We run an Epilog 75 watt
32x20 inch bed.

Joe Hayes
Marion, IL

[Jerry Allen]

I love to do custom boxes, pens, pen boxes, turned bottle stoppers, woodturning, and I am just getting into cutting marble and stone. I also do "sand" blasted champagne bottles and flutes for weddings and other glass items.

Jerry Allen
Tehachapi, CA

[Matty McQuilkin]

Keith, Could you add me to the list of engravers, Im in wisconsin
Thanks Matty

[Linda Forte]

Please add me to the list.
Linda Forte
From Lancaster, PA

[Rose Hamacher]

Please add me to the laser engraver's list -

Rose Hamacher
Morgan City, Louisiana (southern LA)

I have had my Epilog Radius 30 watt for 5 years

[Chuck Burke]

Chris,
I"m in Rotary myself. I would be happy to do your pens for you.

Chuck Burke
American Pacific Awards.

[Chuck Burke]

Keith,
You can add me as well.

Chuck Burke
American Pacific Awards.

[Michael Wells]

Sorry Keith, I guess I didn't tell you where I was hiding! I keep my laser snuggled up beside me in Rainbow Valley, CA. Rainbow is in North San Diego County, just South of Temecula, CA.

Actually I live on a nut farm in Rainbow Valley!!! Really, I have about a hundred Macadamia trees in full bloom right now! I guess that makes me the head nut!
Michael:D

[Lynn Kull]

Hi Keith looks like you need someone from Minnesota on your list so you can add me, Lynn Kull Royalton, Minnesota

thanks lynn

[Robert Stremcha]

Please add me to your list of laser engravers. I have a 100w 24x18 table and a 150w 52x50 table. I have been engraving for 6 years. I also have 2 inverted pin routers for production cutting of various wood or plastic parts. I am located in Elroy Wisconsin.

[Kate Raap]

I have yet to post on this listing. I'm in Coopersville, Michigan. I have a 100w 32X18 table. Also have an 8ft gerber router, vinyl cutter and printer, dye sublimation, and just about anything else for the sign business that you need!

[Kim Maitland]

Doesn't look like you have anyone listed in Ft.Worth, Texas yet. So add Rick and Kim Maitland to your list of laser engravers. We have the Laser Pro 30W Explore II.... Just starting out but eager to try anything that works and sells well.

[Wes Hines]

New member, please add me to your list. We have a trotec 50 watt
17"x29" image area with rotary attachment. We do pens quite often.
located in Tulsa, OK

[Tom Cole]

Please add me to the list. I have an epilog mini 18 35watt. Located in Great Falls, Montana

[Bruce Volden]

Add me also, just stumbled onto this site. I have 2 LMI 25 Watt, 1 Epilog TT 24 35 Watt. Been doing this for 10 years now~~~still FUN!

[Keith Outten]

Add me also, just stumbled onto this site. I have 2 LMI 25 Watt, 1 Epilog TT 24 35 Watt. Been doing this for 10 years now~~~still FUN!

Bruce,

You need to provide a last name for your SMC account before I can add you to our list of engravers. Its also required by our Terms of Service. Send me a Private Message with the necessary information and I will edit your userid.

[rich shepard]

Please add me to the list. Have a Epilog mini 35 watt and am in Salem Or.
rich

[Robert Alexander]

Hi Keith,
After playing with my new toy for a week:) and trying to figure it out:confused:(A Epilog Helix 45 Watt with a 18" x 24" table) which I did. I think I am ready to tackel some projects. Add me to your list of laser owners.:)

[Keith Outten]

Done,

Dave, Michael, Darren, Bruce, Rich and Robert have been added to the list of Engravers. Anyone Else?

[Dave Strickler]

Hello Keith,

Please add me to the list. I am located in York, Pa.
My company name is York Laser, Inc.


Dave Strickler

[Lee DeRaud]

Done,

Dave, Michael, Darren, Bruce, Rich and Robert have been added to the list of Engravers. Anyone Else?Guess you might as well put me on there as well. Anaheim, CA, Versalaser (25W Universal). Not a commercial engraving shop, thank you very much, but I'll be glad to assist woodworkers with advice, inlays, and small personalization jobs.

[Keith Outten]

OK,

I just finished adding Dave and Lee to the list of Engravers. For the record I receive at least ten inquiries a week from people looking for an engraver. I refer them to the list so I hope this is working for everyone.

Our list has gotten so long I will sort it by state as soon as I can find a few minutes. Someday we will have a lead-in page for SMC and I will link to any and all lists we host in our Forums.

By the Way! Anyone who lands a million dollar job please don't forget me :)

[Debbie Sweet]

Dear Keith,

Could you add my name for engravers in Arizona. Thanks!!

Debbie Sweet

[Keith Outten]

Debbie,

I added your name to our engravers list.

[Robert McCloughan]

I would like to be added to the list of Laser Engraver Owners.

[Grant McFarland]

I just found this site and I'm figuring out how the whole forum thing works. I would like to be added to your laser user list. I have a small commercial shop I run as a side business. I am running a 120W Epilog Legend 32 EX, and have been in business for about a year and a half. I have seen some really great info on this site and hope to be able to contribute something helpful.

[Pete Andrew]

Keith

Heck - what's to lose? You can put me on the list too - I'm in Devon in the UK.

Pete Andrew

[Keith Outten]

Robert, Grant and Pete

You have all been added to our list of Engravers.

[Jerry Kriegel]

Hi Keith,

Please add me to the list. I'm located in Belle Plaine, Iowa.
I have a 30 watt explorer.

Thanks,

Jerry Kriegel

[Brent Perkinson]

Hey Keith I love the site it is great and has tons of usefull info. Looks like you could use somebody in Central Florida, and also looks as if you may have a use at some time or another for a little bigger machine. It would be an honor to be on the list.

Custom Cut Creations
Orlando Florida
Cam Tech/Laser Master L20 4x8 foot table
no job too small or big

We appreciate everything that you do to bring the laser engraving community together.

Thanks So Much
Brent Perkinson

[Travis Shipman]

Hello Keith;
I'm in the Shreveport, LA area and also do laser engraving. Please add me to your list of laser engravers. Thank you
Travis Shipman
<!-- / message -->

[Keith Outten]

Jerry, Brent and Travis

You have all been added to the list of engravers.

[Nick Adams]

<table x:str="" style="border-collapse: collapse; width: 300pt;" border="0" cellpadding="0" cellspacing="0" width="400"> <col style="width: 55pt;" width="74"> <col style="width: 138pt;" width="184"> <col style="width: 107pt;" width="142"> <tbody><tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt; width: 55pt;" height="18" width="74">State</td> <td class="xl25" style="width: 138pt;" width="184">City</td> <td class="xl24" style="width: 107pt;" width="142">Name</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">AZ</td> <td class="xl25">Tucson</td> <td class="xl24">Debbie Sweet</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Fresno</td> <td class="xl24">Mike Wallis</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Rainbow Valley</td> <td class="xl24">Michael Wells</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Sacremento</td> <td class="xl24">Jeff Chumbley</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Tehachapi</td> <td class="xl24">Jerry Allen</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Anaheim</td> <td class="xl24">Lee DeRaud</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CA</td> <td class="xl25">Susanville</td> <td class="xl24">Robert McCloughan</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">Canada</td> <td class="xl25">Ottawa</td> <td class="xl24">Abdul Baseer Hai</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">Canada</td> <td class="xl25">Quebec</td> <td class="xl24">William Desrochers</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CO</td> <td class="xl25">Colorado</td> <td class="xl24">Al Curatolo</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">CO</td> <td class="xl25">Arvada</td> <td class="xl24" x:str="Grant McFarland ">Grant McFarland </td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">FL</td> <td class="xl25">Upper East Coast</td> <td class="xl24">Pete Simmons</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">FL</td> <td class="xl25">Crystal River</td> <td class="xl24">Glenn Palhof</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">Fl</td> <td class="xl25">Orlando</td> <td class="xl24">Brent Perkinson</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">HI</td> <td class="xl25">Maui</td> <td class="xl24">Chuck Burke</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">IA</td> <td class="xl25">Central</td> <td class="xl24">Alan Young</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">IA</td> <td class="xl25">Belle Plaine</td> <td class="xl24">Jerry Kriegel</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">IL</td> <td class="xl25">Colona</td> <td class="xl24">Laura DeMeyer</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">IL</td> <td class="xl25">Marion</td> <td class="xl24">Joe Hayes</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">IN</td> <td class="xl25">Fortville</td> <td class="xl24">Nick Adams</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">KS</td> <td class="xl25">Holton</td> <td class="xl24">Aleta Allen</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">LA</td> <td class="xl25">Shreveport</td> <td class="xl24">Travis Shipman</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">MI</td> <td class="xl25">Romeo</td> <td class="xl24">Steve Krim</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">MN</td> <td class="xl25">Royalton</td> <td class="xl24">Lynn Kull</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">MN</td> <td class="xl25">Southern</td> <td class="xl24">Dave Rawn</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">MO</td> <td class="xl25">Springfield</td> <td class="xl24">James Stokes</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">MT</td> <td class="xl25">Great Falls</td> <td class="xl24">Tom Cole</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NJ</td> <td class="xl25">New Jersey</td> <td class="xl24">Gary Shoemake</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NM</td> <td class="xl25">Nogal</td> <td class="xl24">Will Pote</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NV</td> <td class="xl25">Las Vegas</td> <td class="xl24">Ken Nelsen</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NY</td> <td class="xl25">Rochester</td> <td class="xl24">George Perzel</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NY</td> <td class="xl25">Levittown</td> <td class="xl24">Barbara Buhse</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">NY</td> <td class="xl25">Marlboro</td> <td class="xl24">Ian Malings</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">OH</td> <td class="xl25">Carroll</td> <td class="xl24">Thomas Hempleman</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">OK</td> <td class="xl25">Tulsa</td> <td class="xl24">Wes Hines</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">OR</td> <td class="xl25">Salem</td> <td class="xl24">Rich Shepard</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">OR</td> <td class="xl25">Bend</td> <td class="xl24">Darren Coffell</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">PA</td> <td class="xl25">Slippery Rock</td> <td class="xl24">Mike Sub</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">PA</td> <td class="xl25">Lancaster</td> <td class="xl24">Linda Forte</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">PA</td> <td class="xl25">York</td> <td class="xl24">Dave Strickler</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">SD</td> <td class="xl25">South East</td> <td class="xl24">Bruce Volden</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">TN</td> <td class="xl25">Eastern</td> <td class="xl24">Hale Reider</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">TX</td> <td class="xl25">Arlington</td> <td class="xl24">Redge Henline</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">TX</td> <td class="xl25">New Braunfels</td> <td class="xl24">Bruce Larson</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">TX</td> <td class="xl25">Irving</td> <td class="xl24">Ellen Crane</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">TX</td> <td class="xl25">Ft.Worth</td> <td class="xl24">Kim Maitland</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">U.K.</td> <td class="xl25">Devon</td> <td class="xl24">Pete Andrew</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">UT</td> <td class="xl25">Farr West</td> <td class="xl24">Robert Alexander</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">VA</td> <td class="xl25" x:str="Centeral ">Centeral </td> <td class="xl24" x:str="Bob Racine ">Bob Racine </td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">VA</td> <td class="xl25">Gloucester</td> <td class="xl24">Keith Outten</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WA</td> <td class="xl25" x:str="Walla Walla ">Walla Walla </td> <td class="xl24">Kathy Hassler</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WA</td> <td class="xl25">Des Moines</td> <td class="xl24">Michael McDuffie</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WA</td> <td class="xl25">Gig Harbor</td> <td class="xl24">Mark Sipes</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WA</td> <td class="xl25">Des Moines</td> <td class="xl24">Michael McDuffie</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WI</td> <td class="xl25">Sparta</td> <td class="xl24">Matty McQuilkin</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WI</td> <td class="xl25">Elroy</td> <td class="xl24">Robert Stremcha</td> </tr> <tr style="height: 13.8pt;" height="18"> <td class="xl24" style="height: 13.8pt;" height="18">WV</td> <td class="xl25">Charles Town</td> <td class="xl24">George Skinner</td> </tr></tbody> </table>

[Joe Pelonio]

Please add me to the list, I have a 45 watt Epilog 24tt and am in the
Seattle area. I have a sign shop (vinyl) and do a lot of engraved signs
but lately have specialized in really odd laser work such as 300 acrylic
puzzles for Microsoft, wholesale acrylic/wood/door panel/speakerbox
parts for custom auto shops, even items used in manufacturing. I'll
pretty much try anything, and often am told by the customers that
other laser people wouldn't know how to do it. Just have to use your
imagination and experiment.

[Guy Hilliard]

I also have a Laser engraving capability.

Guy Hilliard

Sawdust and Noise
Custom CNC routing, Laser Engraving and Cutting
42 Linkdale Rd.
Brampton, Ont. Canada
L6V 2Y6

URL Sawdust-and-noise.tripod.com (Note no WWW)

[Nick Napier]

Nick Napier, Bedford, In woodworknick@yahoo.com

[Keith Outten]

Nick,

You need to provide a city and state if you would like to be added to our engravers list.

[Rolf Brunner]

Would you be so kind and add my name to the list of people that do laserengraving/ Cutting in Virginia?
Thank you
Rolf

[Chris Cordina]

Hi Keith
could you add me to the list
Chris Cordina Apple Valley MN
40w Mercury
Thank you, Chris

[Keith Outten]

I added Nick, Rolf and Chris today.

[Dave Kelly]

Hi Keith,
Please add my name to your list. I have a 12 x 24 Universal in Wooster, OH.
Dave

[Keith Outten]

Dave,

I added your name to the Engravers List.

[Don Lyon]

Hi Keith,

Please add us:
LaserCraft Engraving
Don Lyon
McKinney, TX 75070
email: sales@lasercraftengraving.com
Epilog Mini24

Thanks! Great Forum!

[Dave Fifield]

Hi Keith,

Please add me to the list:

Name - Dave Fifield
City - San Jose
State - California
Equipment - Epilog Legend 24TT (24" x 12") with rotary attachment, complete woodshop.
Web - http://www.daveswoodenwonders.com

Cheers,
Dave F.

[Mike Shauer]

Hi Keith,

Please add me to the list:

Name -Mike Shauer, Hope B.C.
30 Watt Versa 12 x 24 with rotary attachment
Complete wood work shop

Thanks,

Mike - Hope WoodWorks

[Jim A. Walters]

Hi Keith,

Please add me to the list:

Name - Jim and Nancy Walters
Company - Cedar Creek Studios, Inc.
City - Leo
State - Indiana
Equipment - Pinnacle Mercury 25 watt, (25" x 18") with rotary attachment
Software - Corel Draw, AutoCAD, Zebra Bar-One Barcoding Software

Thanks,

Jim

[Keith Outten]

I added Dave, Mike, Dotte, Jim and Ed .

I have a new web page that I am working on that is organized by state. As soon as I can I will replace the existing list.

[Nate Sauder]

Hi Keith-

We also would like to be added to the list of laser engravers:

Nate & Emily Sauder
Lighthouse Laser Designs
Goodfield, IL

[Wil Lambert]

Please add me to the list. We have a Epilog 36EXT 60W 24" x 36" table w/ Rotary.

LamGem Industries,Inc
Racine,WI
Full service wood shop, laser engraving, sand carving, CNC.

Thanks
Wil

[Larry Alles]

Keith,

Add my name to the list of laser engraver owners. I have an Epilog 24TT 45 watt.

Larry Alles

[James A. Wolfe]

Kieth, You can add me to the list of forum members with a laser engraver. Be sure you put me in the "Dumber Than Dirt" sub heading. I've managed to burn a few pieces without destroying anything but I'm in that early, dazed and confused state. Let's see... 1. Learn Coreldraw 11. 2. Learn Corelpaint 11. 3. Learn PhotograV. 4. Upgrade software to version 12. 5. Re-learn software. 6. Learn to run laser, trying to avoind catastrophe..... You get the picture. Jim

[Hilton Lister]

I have a laser Engraver. However, it is in addition to our normal Engraving business and thru shortage of space is at my home. Therefore, it is strictly speaking at this stage, a hobby.
By and large, most of our work involves rotary or diamond drag engraving on customers items. With some hand engraving, sublimation and sand carving, I have little time left for playing with the Laser. Current projects are acrylic and MDF trinket and jewellery boxes and penstands. Taking some time to refine the hinges to my satisfaction, but gradually working it out.

[Ken Frazer]

Keith
I would like to be added to the list of engravers to. I own a new Epilog 36EXT and a 24x24 Vision Router/Engraver. Company name is Engraving By Laser LLC in Walton, KY
Thanks Ken

[Rebecca Leedy]

Please add me to the list too
Rebecca Leedy
YNH Laser Graphics
Lebanon PA
717.202.3547

[Keith Outten]

James and Hilton,

I need the city you are located in before I can add you to the list.

[Hilton Lister]

Probably shouldn't bother really as I am at the other end of the world. New Plymouth, New Zealand.

[Dave Loda]

Keith,

Can you add me to your list.

Dave Loda
Big Sky Awards
Kalispell, MT
Epilog Legend 24, 40 watt

[Bill Cooke]

Keith, Can you add my name to the list of woodworkers and engravers.

[Leigh Costello]

Keith,
If you are still adding names, here is mine - Leigh and Jim Costello,
J K L Wood Art,etc., Luebbering Mo
Thanks a bunch!
Leigh

[Keith Outten]

Just added Hilton, Dave,Bill and Leigh.

For the record I have future plans to promote this list on our new main page.

[Harry Radaza]

hi keith,

Please add me to the list! I am in the philippines and have learned everything I do from sawmillcreek!

I have 1 Universal VL300 50 watts and 1 Laserpro Mercury 25watts. On the way is another Laserpro Mercury 25watts !

Harry Radaza
LASERART

[Greg Sloan]

Hi Keith,

Please add me to your list.

Greg Sloan
Laser Design Concepts
Greenbush, MI.

[John Minton]

Keith

Please add my Wife:

Vikkie Minton
LaserOne
West central Florida ( near Tampa Bay)
35 watt Epilog

[Michael Wells]

Keith Please my Wife:

Dang Keith... Either this is a typo or a heck of an invitation!!! Hehehee:D

[Ed Albrite]

Please add my name to your list of engravers.
Ed Albrite
Kalispell, Montana
We have a Vytek 48x96- 35 watt laser and have been in bussiness
4 years.

["Terry Pless"]

Hi, if you get this twice sorry I got locked download and had to abort. Any how I like to say HI to everybody and thanks for all the help I gotten from SawMill Creek even though I haven't made any post's I still come here quite often for tip's, help and new ideas. I have a Epilog Legend 24ex/Corel 12 and have had a great time with it, every day is a new challange. I don't have a web page or a store but have had several good accounts (reason for buying laser) that has treated me well. Some of my work can be seen on the Amana Furniture web at http://www.historicwood.org/amana/ . I would like to be added to your list of engravers owners as I'm starting to do more outside work and hoping to have a web page soon.Thanks Terry Pless

[Guy Fuson]

Keith,
Add me to your list on laser engravers.

Thanks,

Guy Fuson- Pahrump, Nevada
http://cabinetfrontsofnevada.com

[Clyde Baumwell]

Keith;

Please add me to list. I am in Charlotte, NC. I have a ULS 30 watt M25. thanks

Clyde Baumwell

[Keith Bragg]

Hi Keith

Would you kindly add me to the ever growing list.
Keith Bragg ~ Bangor Maine

[Mitchell Andrus]

Keith, Add me too.

Thanks

Mitchell Andrus
Stirling, NJ

Laserpro Spirit 60
www.missionfurnishings.com

[Keith Outten]

Terry,

I need your city and state before I can add you to our engravers list.

-------------------------------------------------------------------

Harry Radaza,

Can you provide more than just the Philipines for a location.

-------------------------------------------------------------------

James Wolfe,

I need your city for our list.

-------------------------------------------------------------------

I think I have added everyone that has requested to be included in our Engravers/CNC List. If I missed your name please send me another Private Message and I will add your name ASAP. Click on my name above and select Send A Private Message from the dropdown menu.
Please include your name city and state for your listing.

[Ray Mighells]

I didn't see my name listed, but I would be glad to be added. I've learned a lot from this forum and hope to be able to contribute something of value in the future. Ray Mighells Killbuck NY (Southern Tier)near the entrance to Allegany State Park

[Patrick OBrien]

Kieth,
If you would be so kind as to add me as well.
Patrick OBrien
Colden NY

[Dean Strickland]

Keith,
you may also add me to the list
Dean Strickland
Unique Laser Imaging
Oak Grove, Mn (Twin City Area)
120 w Epilog 36EXT 24"x36"

[Keith Outten]

Just added Ray, Patrick, Dean and Terry.

Added CNC Routing to Nigel's listing.

Our list now has 134 Engravers and CNC Routing entries.

[Nancy Laird]

Please add me and my company to the list of laser owners:

Nancy Laird
D&N Specialties
Rio Rancho, NM
Universal 20W (soon to be 25W)
Thanks

[Nancy Laird]

Just a note to add that my husband and I have just contracted to buy out Bob Belt's shop (see his thread about laser shop for sale). We will be picking up the equipment in a couple of weeks, which will give us TWO lasers - both Universals, one 20W and the other a 40W. The new acquisition will give us the capability to do wine glasses, bottles, marble, granite, and acrylic, as well as the wood products we have been producing. We may not need to upgrade our 20W to 25.

We are excited about getting the new equipment, even though it is meaning that we have to completely reconfigure our shop--we can live with it!!!

[Mike Hood]

Kieth;

Can you add me as well?

APlus Mobile Graphics & Design
Lake Stevens, WA
40W Pinnacle ZX Explorer II
somesailor@gmail.com

[Keith Outten]

I have updated the list this morning and included everyone who has requested to be included here, via Private Message and email.

Anyone who has not been included please let me know.

[John Barton]

Please add us to the list as well:

CueSight Technologies
www.cuesight.com (http://www.cuesight.com)
Scott Taylor
Matthews, (Charlotte) NC.
704-821-1010
Universal X-660 with rotary.

[Dan Luciano]

You can add Lisa and Dan Luciano to your list as well. We are in the Cleveland, OH area currently in the process of building our website. Thanks.
Faithmarks

[Ed Newbold]

I, too, would like to be added to the list of people on the forum having a laser engraving service.

Ed Newbold
5657 Balkan Place
Columbus, OH 43231

http://www.PerfectCreationsOnline.com
ednewbold@enewbold.com

I utilize a Universal M-300 40 watt system and do a LOT of engraving for the Wood Turners club members, the Penturners Group at Yahoo, and many others.

Thanks very much,
Ed

[Constant Laubscher]

I would like to be added to the list of Laser Engraver Owners.

Lazerlinez.com
Atlanta GA
770 891 2301

100W Explorer II

[Dennis Christensen]

Keith, We would like to be added to the list of engravers. We just stated this year and are enjoying the progress we have made." Laser Graphics on Tile & Brick" is the name of our business but we will engrave on anything. We are located in Cedar Falls, Iowa 50613.
Thank you Dennis C Christensen & Sons

[Keith Outten]

I have updated our Laser Engravers and CNC list as of today, October 31st, 2006 based on this tread, my Private Messages and Email I have received.

Anyone who I might have missed please let me know and I would be glad to add your name to our List.

Thanks,
Keith

[Carl Sewell]

Please add me to the list (the first one in Alabama?):

Carl Sewell
Guntersville Laser Engraving
2311 Loveless Street
Guntersville, AL 35976
256-582-2008
www.GuntersvilleLaser.com


Thanks!

[Bob Keyes]

Keith,
Please add me to the list.

CI Engraving
Corbin, Kentucky
606-620-4119
Bob Keyes

Thanks a lot.

[Scott Perry]

Please add me to your list
Lazer Impressions
Amarillo, Texas
806-367-6558

Thanks,
Scott

[Shane Silcox]

Keith-

Please add me to the list as well.

Shane Silcox - Sandy, Utah / Laser Engraving

Thanks!

[Phyllis Rhodes]

well, i USED to be on the list... but i'm not there now... i did a "find on page" and everything. :confused:

i guess i need to be added again... i didn't think i had made anyone mad at me yet... ;)

phyllis rhodes
deer park laser
deer park, texas

[Gary Shoemake]

I found you on the list. Did you look under the thread Laser Engravers and CNC tools?

[Kurt Sallaz]

Steve,

I hope your ebay listings are working. Just as a suggestion, right now is the time to contact any college or university bookstore in your local area and inquire about engraving diplomas. Frames for diplomas normally sell for $135.00 so an engraved diploma is a real bargain, it's unique and it is unlikely you will have any competition.

The graduation season is upon us :)

Keith,

Are you talking engraved diploma frame or an engraved diploma "in" a frame? We have three colleges near us and it would be great to offer a service to them. Can you offer an explaination? Thanks...

Kurt Sallaz

[Keith Outten]

Kurt,

I was talking about engraving diplomas on black marble tile or wood plaques. At 125 bucks it is cheaper than purchasing a quality frame.

.

[Perry Brock]

I am a new member and would like to be added to the list of laser owners.

Thanks,

PLB

[Belinda Barfield]

Please add me to the list as well.

Thanks for the great job you do!!

[AL Ursich]

Hello Everyone,

I am new to this forum. Please add me to you Laser Owner List.

In January 2007, I started a small business in North East Pennsylvania near the NY/NJ/PA boarder.

It is called Pocono Digital Woodshop. I am in Shohola, PA 18458

I have 2 used Epilog Laser Engravers that I am just learning to operate. A First Generation Summit and a Profile. Just starter engravers for now, I want a 50 to 100 watt unit someday.

I also do Sublimation with a Epson R1800 Pinter and 16 by 20 press and just got a Sears CompuCarve to do V Carved signs.

I will do mostly small signs and tourist stuff. Look forward to reading more. Enjoyed the Tips and Ideas for Laser Engravers.

Thanks,

AL "digitalwoodshop"

[Brian Robison]

I'd like to be added to the list also.
Brian Robison/ Shelbyville Tn / Laser Engraving

[Keith Outten]

I will update the laser/cnc list this weekend. All those who posted in this thread will be included.

If you want to have your name added to our list;

Do not send me email or private messages.

Click Here to add your name to our Master List of Engravers and CNC Owners (http://www.sawmillcreek.org/showthread.php?p=266154#post266154).

.