Mikail Khan
04-01-2008, 8:53 PM
My 4 year old Porter Cable Brad Nailer (BN200Ahas stopped firing. I can feel some air escaping around the trigger button when it is depressed.
I examined the o-rings for the trigger and they seem to be OK.
The nailer fires occasionally and drive the brads to the full depth, so I suspect that the drive o-rings are OK.
Does anyone have experience with this type of problem?
Will changing the o-rings on the trigger assembly be OK or should I change the trigger assembly (Piston, 0-rings and sleeve)?
Thanks
MK
I examined the o-rings for the trigger and they seem to be OK.
The nailer fires occasionally and drive the brads to the full depth, so I suspect that the drive o-rings are OK.
Does anyone have experience with this type of problem?
Will changing the o-rings on the trigger assembly be OK or should I change the trigger assembly (Piston, 0-rings and sleeve)?
Thanks
MK