Tim Baude
04-01-2008, 6:25 AM
Hoping someone can help me. I cut a sheet of magnets last night with my helix 24 45 w Epilog. I used vector settings of 10 speed, 65 power and 500 frequency. Lots of small magnet material and residue around magnet (doing gold w/black lettering). Should I change settings or should I cut from back of magnet? I have done 1 sheet, but need more. Thank you for any help. This is my first "real" job with my machine.
Tim Baude
Epilog Helix 24, 45w Corel Draw x4
Tim Baude
Epilog Helix 24, 45w Corel Draw x4