Gary Lange
03-29-2008, 6:39 PM
I have finally finished the woodworking shop area in the basement. I now need to arrange the tools I have and start getting the new ones I want. The shop is 11' X 18' in the main area with an 11' X 4' hallway and a adjacent room that is about 8' X 8'. I plan on getting the Grizzly 1023SLWX, the Grizzly G0593 Jointer, the Grizzly G0453 Planer, and the Grizzly G1029Z Dust Collector. I don't know how soon but over time as I can talk the wife into them. This is looking into the shop from the doorway. The back wall is 11' and from the wall on right to the back wall is 18'.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-1.jpg
This view is from the main shop toward the exit door.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-2.jpg
This view is from the adjacent room toward where the Dust Collector will be next to the lift pump.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-3.jpg
This is looking into the adjacent area from the main shop and it is 8' X 8' and will have the Jigsaw and Drill Press.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-4.jpg
Well that pretty much completes the tour now I just need to get the tools I have set around and start building a Radial Arm Table and a new table for the Jigsaw. Then some cabinets for the walls I guess undecided on those right now. The lighting is 6 T-8's with 4 6500K bulbs each and 2 T-8's with 2 bulbs each. The Digital Camera showed 1/125 sec exposure time with no flash.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-1.jpg
This view is from the main shop toward the exit door.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-2.jpg
This view is from the adjacent room toward where the Dust Collector will be next to the lift pump.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-3.jpg
This is looking into the adjacent area from the main shop and it is 8' X 8' and will have the Jigsaw and Drill Press.
http://i5.photobucket.com/albums/y200/Trackerman/Woodworking%20Shop/FinishedWorkshop-4.jpg
Well that pretty much completes the tour now I just need to get the tools I have set around and start building a Radial Arm Table and a new table for the Jigsaw. Then some cabinets for the walls I guess undecided on those right now. The lighting is 6 T-8's with 4 6500K bulbs each and 2 T-8's with 2 bulbs each. The Digital Camera showed 1/125 sec exposure time with no flash.