Scorpion

[Pete Meacham]

Does anyone have the scorpion file that is cut with a laser out of .125 wood or other material - kind of one of those slot-together animals that we can cut out with the laser.

I have the actual cutting file, but have lost the photo that was with the file that showed the scorpion all put together. You guessed it, I have cut out the scorpion but can't figure where all the parts go.

Thanks, Pete

[Bill Cunningham]

Is this the one?
http://www.desertusa.com/web_cart/db/images/scor.jpg

[Peter Meacham]

Hi Bill

Well, I think it is. I will try to put it together using this photo and advise.

Thanks much. Pete

[Jerry Hay]

Hey,
I wouldn't mind if you wanted to share that with us.

[Peter Meacham]

OK, here are the plans in version 12. The slots are made for .125" material and my stock is 3mm - so the fitting together is a bit sloppy for me - but it would glue together OK. I had to break it ino two files due to size of one file on this forum

Pete

[Keith Outten]

Sorry Pete but I had to remove your file attachments. I believe that the drawings are copywrite protected.

.