View Full Version : Need 1/4" x 6" Alder

Gregg Vaughn
03-24-2008, 3:48 PM
Does anyone know of a source for 1/4" thick by 6" wide Alder? 24" length
would be ideal, 12" would work.

Tom Delaney
03-24-2008, 5:37 PM
during my searches for various suppliers I've resorted to scrollsaw suppliers from magazines - this one has 1/4" alder listed. Never used them but at least you have a baseline source.

Mike Null
03-24-2008, 8:13 PM

I think Colorado Heiloom will cut it for you.

Gary Shoemake
03-24-2008, 8:54 PM
I've used their products and have found them to be a great company. The onwer Paul Anthony is a member here.

Stephen Beckham
03-24-2008, 10:17 PM

Another source might be some of those wood-turner catalogs like Woodcraft or Packard.

You also might want to post a thread over in the wood turner's forum.


---- Edit

Okay - goofed that one - went through my old links and Packard doesn't carry Alder and Woodcraft only carries the veneer... Sorry - try this link and dig for a bit...


Gregg Vaughn
03-25-2008, 8:05 AM
Thanks everyone ...

Jerry Hay
03-25-2008, 7:18 PM
I have some I am not using right now. How much do you need? If I have enough I can send it to you. It is 1/4x6x12

George M. Perzel
03-25-2008, 7:48 PM
Hi Gregg;
I don't have alder but do have 5/32" x 5.75" x24" unfinished cherry, walnut, maple, and jatoba in whatever quantity you need-see the LaserArts Freestuff drawing.
Best regards;

Gregg Vaughn
03-27-2008, 8:32 AM

Thanks for the offer, but I think the customer has decided on Maple which I have on hand.