View Full Version : Electrical Cover Plates
mike klein
03-23-2008, 4:48 PM
Looking for templates for single, double, and tripple gang electrical switch
cover plates. Does someone know of a web site that may have vector images
of these. I'v been looking on istockphoto but haven't found any yet.
Thanks
Mike
James Stokes
03-23-2008, 5:48 PM
Look at the manufacturers web sites. A lot of them are putting their products on their web sites as auto cad files.
Mike Null
03-24-2008, 5:51 AM
Mike
I did a job a couple of years ago and ended up going to HD and measuring the steel plates the customer used. Unfortunately I can't locate the files.
George M. Perzel
03-24-2008, 7:34 AM
Hi Mike;
Here's a few electrical plates- each on a different page-in X4.
Best regards;
George
LaserArts
Skip Weiser
03-24-2008, 9:10 AM
Hi George,
Could you post the switch plates lower than ver. X4 please?
Thanks,
Skip
George M. Perzel
03-24-2008, 12:54 PM
Here ya go- Corel 11.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.