View Full Version : Miter saw measuring system
scottj owen
03-22-2008, 11:06 PM
I am looking to buy something for my miter saw in the shop so I can get accurate cuts without measuring all the time. I am looking for some advice as to some brands or systems that are good. Thanks folks!
Tom Esh
03-23-2008, 12:59 AM
If you've built a station or stand for your MS with extension fences, the Kreg TopTrack system is excellent. Very rugged and accurate. I just put one on mine a couple of weeks ago and it installed without a hitch.
J.R. Rutter
03-23-2008, 1:25 AM
What is your budget?
scottj owen
03-23-2008, 1:35 AM
I am not sure about budget, never thought about it, probably $500 max, I was looking at the proscale website, but that is probably more than I need. I was hoping there was something that came with the fences also.
Joe Chritz
03-23-2008, 2:35 AM
No reason you can't build a decent fence and attach a scale. If you build the fence and stop block first you can attach the tape to read accurately.
If you are looking commercial the Kreg fence is probably my first choice if I was buying.
Joe
Ed Falis
03-23-2008, 3:05 PM
Have you checked the "consumer" version made by the proscale people? http://www.digi-kit.com/digistop.htm
I have their digital tablesaw scale, and it's very nice.
- Ed
kent borcherding
03-23-2008, 3:47 PM
Scott ,
sent you a PM
Bob Sanders
03-25-2008, 9:14 AM
http://www.youtube.com/watch?v=6FmFKugm0dk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.