Framing nailer choices...

[Paul B. Cresti]

Ok so let hear everyones experiences or choices for a pnuematic framing nailer. I might be getting into residential construction and need a real workhorse. I looked at Paslode, Bostich, Senco, PC, Dewalt and Hitachi and so far the Dewalt and Paslode feel the best in my hand. Any ideas?

[Rob Russell]

Ok so let hear everyones experiences or choices for a pnuematic framing nailer. I might be getting into residential construction and need a real workhorse. I looked at Paslode, Bostich, Senco, PC, Dewalt and Hitachi and so far the Dewalt and Paslode feel the best in my hand. Any ideas?

Paul,

A good start would be This Thread (http://www.sawmillcreek.org/showthread.php?threadid=6571) :)

Rob

[Stan Smith]

I had a PC fn350 roundhead framing nailer. Worked flawlessly and never a single jam. Gave it to Habitat for Humanity when I was through with major projects here and even borrowed it back a couple of times. It just keeps going and going with no problemos.

Stan

[Robert Ducharme]

I have had my SENCO for 10 years and have never had any problems. Its performance / reliability persuaded me to buy a stapler, a brad nailer, and a smaller stapler from SENCO. Also have never had any problems with them either.

[Ken Garlock]

The crew that framed our house used Senco nailers with Hilti nails, and Mikita Circular Saws.

[Ted Shrader]

I had a PC fn350 roundhead framing nailer. Worked flawlessly and never a single jam. Gave it to Habitat for Humanity when I was through with major projects here and even borrowed it back a couple of times. It just keeps going and going with no problemos.

Stan

Same here (except for the part about Habitat for Humanity - I still have mine.)

Ted

[Andy London]

I took a break from my banking career a few years ago and built 14 homes over a summer using two crews....I bought all Senco nailers. They are the norm around here in the construction industry.

Andy

[JayStPeter]

After using Senco and Paslode, I wouldn't recommend the PC anymore. Mine (PC) doesn't toenail nearly as well as the other two. I double the recommendation on the Paslode cordless. If you're in it to make money, I'm convinced that cordless is the ticket. Plus, it's lighter than the others (even with the batteries and fuel in) and works fantastic.
I'm not sure about HD, but Lowes here has the fuel/nails for the Paslode. Pretty much everyplace has nails for the PC and Senco (same nails).

Jay

[Walt Pater]

The old Bostich stick nailer (not magnesium) is a real workhorse, though cordless is really handy. You don't mention them in your post, but I would caution against buying a coil nail framer-they are heavy when fully loaded.

[Tyler Howell]

You did say pnuematic but I 'm a confirmed Paslode Impulse owner. Going to replace the brad nailer and stapler when the money tree blooms. Great reliable machine. Smells a little funny.
:(It's OK Rob! We like to reinvent the wheel and talk about our stuff.:p

[Paul B. Cresti]

Thanks guys for all of your responses so far. Like I said I think I am leaning towards the Paslode as it and the Dewalt felt the best in my hands. The only concerns I do have is it is a clipped head nailer and of course depending on the area and/or inspector you could have an issue. I know the Senco's seem to be good but they are just so heavy in comparison to the Paslode or Dewalt. I am not a small guy but swinging a big gun around all day will really take its toll.

Tyler, I do have the Impulse both framing and finish and they are great for my work at home (plenty of it) when I am not in the shop.

[Jim Becker]

The only concerns I do have is it is a clipped head nailer and of course depending on the area and/or inspector you could have an issue.

This is probably going to be more and more of an issue, Paul. A full head nailer is a safer purchase, IMHO.

[Tyler Howell]

I am quite sure in Earthquake and huricane country a full head nail is required. Natural diasters must exert some serious forces. Trying to undo some of my mistakes with the clipped head nails was a major undertaking.

[Rob Russell]

It's OK Rob! We like to reinvent the wheel and talk about our stuff.:p

Tyler,

I understand rehashing stuff - it's quite common to think of something else, or have more time to type, for a response a second or third time around. It's just that I remembered a thread not long ago on this very topic. That's one reason there's a "Search" button up on the top right part of the page.

I have a Bostitch coil framing nailer. I haven't used it much, so long term reliability isn't something I can comment about. It's been more of a "trying to frame this %^&*or install that blocking with a hammer would have been a major pain and the nailer made a big difference. I got it on the HD clearance/recon table, although - other than the "recon xx/xx/xx" engraved on the tool - you wouldn't know it's not brand new. For me, the coil style has been important because the gun fit into some tight and awkward spots that a stick-style nailer wouldn't have. I believe that it shoots full head nails, although to be honest I truly don't remember. I'll find out next weekend when I pull it out to use for a small framing project.

The gun has done everything I've needed it to. I do need to replace the multi-fire nose with a single fire one.

For me, the issue of an air gun vs. cordless isn't there. The batteries in a Paslode would die on me before the fuel cell ran out.

Rob

[Jim Bills]

Ok so let hear everyones experiences or choices for a pnuematic framing nailer. I might be getting into residential construction and need a real workhorse. I looked at Paslode, Bostich, Senco, PC, Dewalt and Hitachi and so far the Dewalt and Paslode feel the best in my hand. Any ideas?

Paul, Check the classifieds below for a Senco FramePro 602.

Thanks, Jim

[Jim Becker]

Paul, Check the classifieds below for a Senco FramePro 602.
I bought the Senco 602 nailer last year when I was doing my major kitchen renovation. It's a good tool and I only have one complaint...it's prone to double and triple firing, especially in the hands of a framing nailer novice like me. Very touchy...and I need to convert it to single fire in my copious free time before the next project.

But it's comfortable to hold and well made.

[Jim Bills]

I bought the Senco 602 nailer last year when I was doing my major kitchen renovation. It's a good tool and I only have one complaint...it's prone to double and triple firing, especially in the hands of a framing nailer novice like me. Very touchy...and I need to convert it to single fire in my copious free time before the next project.

But it's comfortable to hold and well made.

Jim, I don't think they charged me anything for the conversion kit, takes about a min to install.

I agree about the novice part and the double fires, that is exactly what prompted me to change the trigger.

I got the kit from Senco direct, found their telephone number on the internet and gave them a call, nice and helpful people.

Jim Bills