Burt Alcantara
03-22-2008, 1:15 PM
I recently bought an Irwin 10" drill extender to use in my chuck mounted tailstock. Works OK but very slow. I'm using a 7/8" bit. Can this be used free hand? For some reason I get the feeling that the Forstner might be somewhat reckless freehand.
On another note, Woodcraft sells some nice augers, 3/4" up to 30 mm but they are short. Would it be a bad idea to put this short auger on a equally thick spindle handle of, say, 10-12" in length? Sort of like a weird pool cue.
Burt
On another note, Woodcraft sells some nice augers, 3/4" up to 30 mm but they are short. Would it be a bad idea to put this short auger on a equally thick spindle handle of, say, 10-12" in length? Sort of like a weird pool cue.
Burt