Rick Hubbard
03-19-2008, 1:34 PM
Judging by the number of threads here on SMC (and other forums) on the subject of DC fittings, ductwork and hoses, it seems to me that it would be worthwhile to put together a definitive reference source to make all this information easily accessible. I suspect, though, that this more than a one-person project so I’m looking for some folks who might be interested in helping out.
As I envision it, this resource would catalog ALL the different products used for ductwork (everything from spiral metal pipe to cardboard tubes), ALL the different connectors and adaptors and, most importantly, a cross reference chart of inside/outside diameters of each item so that folks can determine what fits with what.
I’m not sure if this is a project that deserves an ongoing SMC thread or not, but I am convinced that the idea has merit. A good starting point would be information from a thread that I can’t find that had some REALLY good information on ID/OD for PVC pipe.
Any takers?
Rick
As I envision it, this resource would catalog ALL the different products used for ductwork (everything from spiral metal pipe to cardboard tubes), ALL the different connectors and adaptors and, most importantly, a cross reference chart of inside/outside diameters of each item so that folks can determine what fits with what.
I’m not sure if this is a project that deserves an ongoing SMC thread or not, but I am convinced that the idea has merit. A good starting point would be information from a thread that I can’t find that had some REALLY good information on ID/OD for PVC pipe.
Any takers?
Rick