Jack Mincey
03-10-2008, 9:55 AM
Here are a few pictures of the Rodo burl HF finished. It still has a few soft spots even with CA glue and wood hardner. It is 8" dia. by 4 3/4" high. The hole in the 2nd picture had dirt in it so I left it as is. The guy had tried to burn this burl and I think that must have made it dark for Rodo. The first picture show the side that was so far gone that I had to stablize it with a lot of CA and TLC.
Jack
http://usera.imagecave.com/flyrod444/100_0669-copy.jpg
http://usera.imagecave.com/flyrod444/100_0670-copy.jpg
http://usera.imagecave.com/flyrod444/100_0671-copy.jpg
http://usera.imagecave.com/flyrod444/100_0672-copy.jpg
Jack
http://usera.imagecave.com/flyrod444/100_0669-copy.jpg
http://usera.imagecave.com/flyrod444/100_0670-copy.jpg
http://usera.imagecave.com/flyrod444/100_0671-copy.jpg
http://usera.imagecave.com/flyrod444/100_0672-copy.jpg