PDA

View Full Version : New Miter Plane from Philly Planes



John Padgett
03-06-2008, 4:38 PM
My new plane arrived today. It is awesome. The mouth is so tight you cannot see any light through it. I sharpened it up and took some end grain shavings. The sides are perfectly square to the bottom. Has a massive 1/4" blade. Going to get a lot of use out of this one.

http://www.carolinacraftworks.com/plane.jpg



These are end grain shavings on poplar drawer sides.
http://www.carolinacraftworks.com/shavings.jpg

Jim Koepke
03-06-2008, 5:09 PM
These are end grain shavings on poplar drawer sides.
http://www.carolinacraftworks.com/shavings.jpg

With nothing for scale in the picture, it looks like you are using 2X4s for the drawer sides.

jim

John Padgett
03-06-2008, 6:04 PM
They do look thick. Only 1/2" though.