Walt Nicholson
03-02-2008, 8:18 PM
Another creeker shared a link for plastic bottles for storing things
http://www.stevespanglerscience.com/product/1367nother so I ordered some (30 of them for $15 bucks) and made a quick storage rack for my scroll saw blades. I used a piece of 1X6 and drilled holes for the tubes (they have a lip towards the top that keeps them from going all the way through) The scroll saw stand flares out at the front so one row is shorter than the other so the tubes will clear underneath. I drilled a hole in one corner and inserted a nylon bushing. I replaced the front mounting bolt on the stand with a longer bolt. I put additional nuts with washers on either side of the board, filled the tubes with my blades and called it good. I can swivel it out when needed then swing it back when I'm done.:D
http://www.stevespanglerscience.com/product/1367nother so I ordered some (30 of them for $15 bucks) and made a quick storage rack for my scroll saw blades. I used a piece of 1X6 and drilled holes for the tubes (they have a lip towards the top that keeps them from going all the way through) The scroll saw stand flares out at the front so one row is shorter than the other so the tubes will clear underneath. I drilled a hole in one corner and inserted a nylon bushing. I replaced the front mounting bolt on the stand with a longer bolt. I put additional nuts with washers on either side of the board, filled the tubes with my blades and called it good. I can swivel it out when needed then swing it back when I'm done.:D