View Full Version : Pics of my shop
Keith Beck
03-02-2008, 5:09 PM
Your typical two-car gara... um, shop.
Starting in the southwest corner and working clockwise:
The router table:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03203.jpg
The mitersaw bench, including the mortiser and where my bowl blanks are stored:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03216.jpg
Next is my main workbench and vortex area with "His Normness" overseeing everything:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03205.jpg
Next is my drill press and clamp rack:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03239.jpg
Then the jointer and air compressor:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03207.jpg
The DC, drum sander, planer and lumber rack:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03208.jpg
My bandsaws and clamp cart:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03209.jpg
And in the center of the room, "The General":
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03210.jpg
and my assembly/work/lumber bench:
http://i78.photobucket.com/albums/j114/ldoforcno/DSC03211.jpg
As you've probably noticed, I've still got to get my DC ductwork straightened out. It's on my list... :(
That concludes our tour, thanks for visiting!
Keith
Steven Bolton
03-02-2008, 5:15 PM
Nice shop. How do you like the Jet/Performax 16/32 sander?
Steve Bolton
Keith Beck
03-02-2008, 5:26 PM
Nice shop. How do you like the Jet/Performax 16/32 sander?
Steve Bolton
I like it a lot. It's great for end-grain cutting boards. The biggest issue I've had with it is keeping the conveyor belt running straight. It wants to shift side to side. I think I've got it now though.
Keith
Peter Quadarella
03-02-2008, 6:44 PM
That Hitachi miter saw cracks me up. :) Very nice shop, I love all the shop furniture you made.
Greg Peterson
03-02-2008, 6:47 PM
Nice home away from home Keith.
Are you running 5" flex hose to the PVC or 4". Looks identical to my HF DC with the Wynn filter.
Shanks for sharing.
Mike Langford
03-02-2008, 11:33 PM
NICE organized shop, Keith.
How do you like your Yorkcraft jointer?
I see you've relocated your sandpaper holder to the wall....Did you get rid of the "ghetto looking" free low budget mobile planer cart? :D I also notice you aren't using dryer duct hose anymore! ;) http://www.sawmillcreek.org/showpost.php?p=536880&postcount=10
gary Zimmel
03-03-2008, 1:04 AM
Keith
Nice looking shop. Very orginized and every thing in its place.
Keith Beck
03-03-2008, 11:19 AM
That Hitachi miter saw cracks me up. :) Very nice shop, I love all the shop furniture you made.
Yeah, it's definitely an alien-looking thing! I'm not crazy about the looks of it, but it cuts great.
Keith
Keith Beck
03-03-2008, 11:22 AM
Nice home away from home Keith.
Are you running 5" flex hose to the PVC or 4". Looks identical to my HF DC with the Wynn filter.
Shanks for sharing.
Greg,
I'm using 4" throughout. My DC is actually a Grizzley 1029Z. I used to have the HFDC, but I got a real good deal on the 1029Z, so I gave the HFDC to my brother. As a true 2hp DC, the Grizz has a little more oomph than the HF had.
I'd like to upgrade my main ducting to 6", but since I have a trashcan separator, I can't. I've been toying with using the motor and impeller from the Grizz and building a cyclone, but I don't know if that'll ever happen.
Keith
Keith Beck
03-03-2008, 11:27 AM
NICE organized shop, Keith.
How do you like your Yorkcraft jointer?
I see you've relocated your sandpaper holder to the wall....Did you get rid of the "ghetto looking" free low budget mobile planer cart? :D I also notice you aren't using dryer duct hose anymore! ;) http://www.sawmillcreek.org/showpost.php?p=536880&postcount=10
Mike,
I really like the Yorkcraft jointer, it's probably one of my favorite tools. I got it while it was on sale, so the price was right too. Too bad they're not making them anymore.
Ah, so you remember the "ghetto cart" huh? Seems like my shop is continually undergoing changes. Actually, I painted the cart black and it now resides under my mitersaw bench. I basically utilize it as a paint locker. BTW, I still do have a length of dryer duct hose going to the mitersaw. Don't knock it until you try it, it works great! :D
Keith
Bruce Page
03-03-2008, 11:40 AM
Nice shop Keith. It looks like you have all the necessary tools and you can still move around – no small feat in a garage shop!
That’s a killer Hatachi CMS!
James Williams 007
03-03-2008, 7:01 PM
nice shop i like the long board in the corner!
Jim O'Dell
03-03-2008, 7:30 PM
Great use of space! Wish I could afford a General for my shop. I'd love to have one of those. Thanks for the tour! Jim.
Keith Beck
03-03-2008, 10:07 PM
nice shop i like the long board in the corner!
It took me a second to figure out what you were referring to. :D That thing is something my son found somewhere that he wants to make a project out of. I'm beginning to think he's forgotten about it though...
Keith
Jason Berkley
03-03-2008, 10:19 PM
I like it, too.
Norman Pyles
03-03-2008, 11:59 PM
Very nice shop you have there. :cool:Great pic of Norm also, Norm rocks.:)
James Williams 007
03-04-2008, 3:15 PM
Put some trucks on it and surf all year!
Matt Meiser
03-04-2008, 3:19 PM
Nice shop Keith. I love your solution to the Yorkcraft jointer's space hog fence.
Keith Beck
03-04-2008, 3:43 PM
Nice shop Keith. I love your solution to the Yorkcraft jointer's space hog fence.
That useless space under the stairs actually is good for something! :D
Keith
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.