Paul Gallian
02-28-2008, 11:04 PM
Has anybody ever had this happen to them except me?
Lathe switch set to Forward. Lathe works fine. Reduce Rpm's to zero turn switch off. Restart and the lathe runs in the reverse direction. Does not happen every-time put could be safety problem in the future.
P.S. New inverter arrived today.. replace the old one and still had the same problem -- reluctantly called WMH service and now seems to be working (reprogrammed the box - maybe this was all that was wrong with the first inverter)
PAUL making a few shaving after a month wait...
Lathe switch set to Forward. Lathe works fine. Reduce Rpm's to zero turn switch off. Restart and the lathe runs in the reverse direction. Does not happen every-time put could be safety problem in the future.
P.S. New inverter arrived today.. replace the old one and still had the same problem -- reluctantly called WMH service and now seems to be working (reprogrammed the box - maybe this was all that was wrong with the first inverter)
PAUL making a few shaving after a month wait...