Joe Petersen
02-27-2008, 5:57 PM
I posted a while back when looking at a Delta contractor saw and wound up with this Craftsman. It was rusted pretty bad on top. More so than I thought it was. These aren't professional but do the job well. If I didn't post pics now I never would so...
I made a way to move it in and out of the garage. I tried to make it like the herc-u-lift but it didn't come out as well. I cobbled it together from leftovers.
http://public.fotki.com/petersenj20/tablesaw/tablesaw/jerkulift.html
The outfeed had to work with the rear fence track so this is what I came up with. I bolted a piece of angle iron between the table and track. It is pretty solid.
I also made a sled out of malmine, slick side down and am working on a thin piece fence straddle.
I made a way to move it in and out of the garage. I tried to make it like the herc-u-lift but it didn't come out as well. I cobbled it together from leftovers.
http://public.fotki.com/petersenj20/tablesaw/tablesaw/jerkulift.html
The outfeed had to work with the rear fence track so this is what I came up with. I bolted a piece of angle iron between the table and track. It is pretty solid.
I also made a sled out of malmine, slick side down and am working on a thin piece fence straddle.