A new Corian question [Archive] - Sawmill Creek Woodworking Community

Kirk (KC) Constable

03-13-2004, 5:37 PM

Can I screw into it? I've made the frame, and added an inner frame/rabbet for the Corian to rest on, but I'd kinda like to attach it somehow for the inevitable time when somebody takes the top off and turns it over. Maybe a couple elongated holes? Please say yes...this has already turned into an expensive lesson! :(

KC

Jamie Buxton

03-13-2004, 6:06 PM

Can I screw into it? I've made the frame, and added an inner frame/rabbet for the Corian to rest on, but I'd kinda like to attach it somehow for the inevitable time when somebody takes the top off and turns it over. Maybe a couple elongated holes? Please say yes...this has already turned into an expensive lesson! :(

KC

It takes drilling and tapping for machine screws quite nicely.

Todd Burch

03-13-2004, 9:41 PM

Ditto Jamie. And if you (hopefully not) screw that up, you can drill an ovesize hole and epoxy a nut or insert into it.