David Duke
02-26-2008, 10:21 PM
I bought the plywood for my pantry unit at my usual supplier, I have had good luck using his lower priced "chinese birch" in past projects, it had always had the typical void and occasional small patches of the plys separating. I was noticing that this was a little worse that in the past but was still adequate until I crosscut this one :mad::mad:.
82674
82675
I sent these pictures to the supplier this evening, I'll let you know what he says if anything.
82674
82675
I sent these pictures to the supplier this evening, I'll let you know what he says if anything.