Bandsaw Bearings

[Haddon Carryer]

I bought an old Crescent bandsaw with 20 inch wheels. One of the repair areas I need to address is the Babbitt bearings. They're pretty well shot and I need an experienced recommendation on who should repour them.

Any actual experience with this will be welcome.

[Adam Grills]

For oler machines and very much babbitt machines you should read through www.owwm.com (http://www.owwm.com) Loads of info on babbitts there and lots of knowledgable people on older machines.
Adam

[Loren Hedahl]

If it were mine, I would investigate having a machine shop convert it to modern ball or roller bearings.