View Full Version : Double Pointed Brads, WHERE?
Roger Ronas
02-23-2008, 11:21 AM
I haven't been able to locate these. Are they still available and if so where?
Thanks
Roger
mike holden
02-23-2008, 6:09 PM
Why would you need to buy them double pointed?
Just take a normal brad, pound down part way, and clip off the end with a pair of diagonal cutters - forming the second point.
Keeps from dulling the point you pound on too!
Mike
John Karas
02-23-2008, 10:08 PM
I haven't been able to locate these. Are they still available and if so where?
Thanks
Roger
They are available i do have a couple different sizes from before. yes is available they called pins for pin gun they are available from 12mm to 25mm imperior 1/2" to 1"
Sorry i'm in Australia but i believe still will be available in USA.
John
Roger Ronas
02-24-2008, 12:23 AM
Thanks guys.
Roger
harry strasil
02-24-2008, 8:38 AM
FWIW, double pointed brads (homemade of course) were the old time WWers solution to what we call dowel points today, they marked both sets of holes before drilling the dowel holes.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.