Double Pointed Brads, WHERE?

[Roger Ronas]

I haven't been able to locate these. Are they still available and if so where?

Thanks
Roger

[mike holden]

Why would you need to buy them double pointed?
Just take a normal brad, pound down part way, and clip off the end with a pair of diagonal cutters - forming the second point.
Keeps from dulling the point you pound on too!
Mike

[John Karas]

I haven't been able to locate these. Are they still available and if so where?

Thanks
Roger

They are available i do have a couple different sizes from before. yes is available they called pins for pin gun they are available from 12mm to 25mm imperior 1/2" to 1"

Sorry i'm in Australia but i believe still will be available in USA.


John

[Roger Ronas]

Thanks guys.

Roger

[harry strasil]

FWIW, double pointed brads (homemade of course) were the old time WWers solution to what we call dowel points today, they marked both sets of holes before drilling the dowel holes.