PDA

View Full Version : Mandrel Too Short????? for European



Tim Vice
02-22-2008, 11:13 PM
What am i doing wrong? I have just started turning pens. I have used up my 5 slim style pens now I would like to try the European Style but it looks like my mandrel is to short, has any one else had this problem? It is 6 1/4 inches from root to tip. The mandrel was in a beginners kit from craft supplies USA and the bushings are from Woodcraft?

Any Ideas??

Bruce Shiverdecker
02-22-2008, 11:48 PM
Isn't it adjustable? Most of the "Short" ones can be extended by losening a nut.

If not, you will need the "inexpensive" version (about $10.00) at Woodcraft and elxewhere.

Bruce

Nathan Camp
02-23-2008, 12:33 AM
Tim,

I bought one from Lee Valley. It was about a 3/4" longer than the one I got at Woodcraft. It's ideal for the europeans.

Nathan

Tim Vice
02-23-2008, 1:34 AM
I could not wait for a new mandrel, so to the garage I went and cut 3/16 of the longer bushing. Worked perfect, Thanks

Ben Gastfriend
02-23-2008, 6:24 AM
If there's a will, there's a cheap way. Nice job!

Bernie Weishapl
02-23-2008, 11:08 AM
I bought the adjustable one. Sure does make it nice when doing single blank Seirra's or longer Euro's.