Dominic Greco
03-12-2004, 7:54 AM
Hi everyone,
Since many of you asked me for details on the dust shroud I made for my 14" bandsaw, I went ahead and drew it in AutoCad.
Kieth was kind enough to provide some space for me to store the drawing for all of you to view and download.
The shroud is made from 3/4" plywood, and 1/4" hardboard, and one 1 1/2" sq x 6" long piece of hardwood. You also need and 1/4" x 3" long Eye bolt, (2) washers, and a 1/4" wingnut.
This dust shroud works well by itself, but by adding another 4" dia one in the lower wheel housing helps out immensely. Especially when resawing.
If you have any questions, just drop me a line, or post here.
Here is the link:
Jet 14" Bandsaw Dust Shroud (http://www.sawmillcreek.org/cad/14bs_dust_shroud.tif)
Since many of you asked me for details on the dust shroud I made for my 14" bandsaw, I went ahead and drew it in AutoCad.
Kieth was kind enough to provide some space for me to store the drawing for all of you to view and download.
The shroud is made from 3/4" plywood, and 1/4" hardboard, and one 1 1/2" sq x 6" long piece of hardwood. You also need and 1/4" x 3" long Eye bolt, (2) washers, and a 1/4" wingnut.
This dust shroud works well by itself, but by adding another 4" dia one in the lower wheel housing helps out immensely. Especially when resawing.
If you have any questions, just drop me a line, or post here.
Here is the link:
Jet 14" Bandsaw Dust Shroud (http://www.sawmillcreek.org/cad/14bs_dust_shroud.tif)