Bill Grumbine
03-11-2004, 5:22 PM
Good afternoon all
Hot off the lathe here is a bowl about to be delivered on my way to our turning meeting tonight. I thought about delivering it after the meeting, so I could show it at show and tell, but that would be awful late. I'll just have to tell a story about the one that got away. :D
<img src ="http://www.enter.net/~ultradad/wormymapletrumpet01.jpg">
<img src ="http://www.enter.net/~ultradad/wormymapletrumpet02.jpg">
This bowl is approximately 10" x 3 " x 3/16" thick, and is finished with Watco Danish Oil and a Beall buffing system.
Thanks for taking a look.
Bill
Hot off the lathe here is a bowl about to be delivered on my way to our turning meeting tonight. I thought about delivering it after the meeting, so I could show it at show and tell, but that would be awful late. I'll just have to tell a story about the one that got away. :D
<img src ="http://www.enter.net/~ultradad/wormymapletrumpet01.jpg">
<img src ="http://www.enter.net/~ultradad/wormymapletrumpet02.jpg">
This bowl is approximately 10" x 3 " x 3/16" thick, and is finished with Watco Danish Oil and a Beall buffing system.
Thanks for taking a look.
Bill