Stewart Crick
03-11-2004, 3:02 PM
Just got my first copy of the AAW magazine. I'm interested in making the round picture frame from the article that starts on page 48. The project calls for a scoll chuck.
Now I'm really new to turning, so lets assume I know nothing about scroll chucks and could someone please give me a primer, or "sroll chucks for dummies" lesson please. I have figured out that I need to buy for the specific threads on my lathe and that for this particular project I also need to buy a flat jaw attachment for the scroll chuck.
But I don't know how many sizes they come in, what size I need, or what seperates a quality chuck from a cheap chuck.
Help!
Stu
Now I'm really new to turning, so lets assume I know nothing about scroll chucks and could someone please give me a primer, or "sroll chucks for dummies" lesson please. I have figured out that I need to buy for the specific threads on my lathe and that for this particular project I also need to buy a flat jaw attachment for the scroll chuck.
But I don't know how many sizes they come in, what size I need, or what seperates a quality chuck from a cheap chuck.
Help!
Stu