View Full Version : Need soor anodized plates
Shane Silcox
02-20-2008, 11:48 AM
I just got a large order for custom anodized plates - 4.25x6.25 1/8" thick. Black anodized. Anyone have a good source for anodized plates?
Scott Shepherd
02-20-2008, 11:58 AM
http://www.idplates.com/
Shane Silcox
02-20-2008, 12:17 PM
Thanks -I'll see if they can do what I need. I appreciate the link!
Shane Silcox
02-20-2008, 12:20 PM
Just got off the phone and they cannot do black anodized in 1/8" thick. Any other options?
Scott Shepherd
02-20-2008, 12:40 PM
No ideas from me, maybe someone else knows a good source.
Joe Pelonio
02-20-2008, 12:48 PM
Try these people, one of my customers used them for some material.
http://www.hhirschberger.com/
Shane Silcox
02-20-2008, 12:50 PM
Awesome - thanks Joe, I'll check them out.
Brett Halle
02-20-2008, 12:52 PM
You might also try http://www.chewbarka.com
You should contact Fred at the number on the web site, he's very helpful and has been known to do custom runs.
Mike Null
02-20-2008, 2:40 PM
You might look locally for a sheet metal distributor then an anodizer.
Brian Robison
02-20-2008, 2:56 PM
Shane, find a good machine shop in your area.
Look for one with a "wire edm".
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.