Brad Ridgway
02-16-2008, 7:10 AM
I had been considering expanding my shop, but am pretty much ruling that out so trying to come up with some efficient layouts.
One is that i'd really like to keep the jointer next to the left side of tht table saw, but the big raised switch on this jointer means i have to move the thing everytime i crosscut long boards/panels or if i build/use a sled... If i cuold get the switch out of the way, the clearance is fine.
Anyone redone this switch either replacing it with a less obtrusive one of mounted it under the infeed or something?
thx in advance
-brad
One is that i'd really like to keep the jointer next to the left side of tht table saw, but the big raised switch on this jointer means i have to move the thing everytime i crosscut long boards/panels or if i build/use a sled... If i cuold get the switch out of the way, the clearance is fine.
Anyone redone this switch either replacing it with a less obtrusive one of mounted it under the infeed or something?
thx in advance
-brad