View Full Version : can anybody build one of these?
Stefan Antwarg
03-09-2004, 4:30 PM
I think the joinery would be the hardest part:)
Tyler Howell
03-09-2004, 5:06 PM
I think the joinery would be the hardest part:)
Yah! That's what I got. I was shooting for a simple box.;)
Rob Littleton
03-09-2004, 5:24 PM
I think the joinery would be the hardest part:)
I was having a little trouble with the table saw and thought I had measured twice but.................
Chris Padilla
03-09-2004, 6:19 PM
I got about 9 of those in the scrap bin out back of my house, had a bad, bad weekend once....:mad:
Dennis Peacock
03-09-2004, 10:55 PM
That's what ALL my stuff looks like!! ;)
Joe Bourbois
03-10-2004, 1:53 AM
I think Incra has a template for that. :D
Roger Eihausen
03-11-2004, 5:28 PM
Made one, but had trouble putting a top on it.
Steve Clardy
03-14-2004, 9:02 PM
Made one, but had trouble putting a top on it.
Good one Roger. Seems I had one of those projects also--------.
Seems theres one once in a while that makes it to the wood stove. Steve
Pete Lamberty
03-15-2004, 9:36 AM
I think only that guy named M. C. Escher makes those things. He must be really good.
Paul Geer
03-17-2004, 2:33 PM
I think Norm built one of those on the NYW. No plans or video listed though...
Glenn Clabo
03-17-2004, 3:01 PM
Pretty much everything I build looks like that!
John Schreiber
03-17-2004, 9:17 PM
After I found the nut below to go on my multiplane planer it was a cinch to build
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.