Stencil Rubber

[Robert Rosensteel]

Hello anyone use or know of a good self sticking rubber stencil that is flat so it will stay flat (Sheets) that can be cut by laser. And thick enough to use to sandblast stone. Thank Robert

[Joe Pelonio]

I use Anchor for sandblasting but cut it on the plotter. It does cut nicely on the laser but you have to attach it to something flat like mdf because the plastic release liner curls from being on a roll (staple gun it to the mdf around the edges).

[Robert Rosensteel]

Thanks Joe never thought about staples to hold it in place.

[James Stokes]

When I first started I used 3m. They have an 18mil stencil that cuts very easy on the laser.