View Full Version : Jewelry Box Hardware
Keith Starosta
02-13-2008, 1:59 PM
Howdy folks! I was hoping that you could pass along your sources for decorative jewelry box hardware. I've looked at Rockler and a few others, but haven't really seen anything that is jumping out at me. Specifically, I'm looking for options on morticed lid stays.
Thanks!!
- Keith
Lance Norris
02-13-2008, 2:48 PM
Well... Brusso makes the nice morticed lid supports. They are about $20. I have seen them at the local Woodcraft store, and have seen them on Amazon if you dont have a local Woodcraft. You can order them from Woodcraft as well. You have to epoxy the piece into the lid. Also look at the quadrant hinges.
http://woodcraft.com/family.aspx?familyid=3454
Harley Lewis
02-13-2008, 3:47 PM
Lee Valley is the place of choice for me. They have a much better selection than most, google their web site and go to their hardware selection and I would be surprised if you can't find what you are looking for. I buy a lot of brass hinges and handles for blanket chests etc from them.
Roger Bolen
02-13-2008, 4:07 PM
Harley,
You can order them through Beall Tool Company if you can't find them anywhere else.
http://www.bealltool.com/products/hardware/
Roger
Larry Fox
02-13-2008, 4:19 PM
http://www.whitechapel-ltd.com/
Keith Starosta
02-13-2008, 4:40 PM
Thanks, guys!!
I can't believe I forgot about Lee Valley..... :rolleyes:
- Keith
Bill Huber
02-13-2008, 8:25 PM
Here is another place.
http://www.smallboxhardware.com/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.