sticky problem

[Joy Parker]

Help!!! I just bought (super cheap) a Delta Industrial Table Saw. I works great but one small problem. The guy who had it last would cut work pieces that had been just glued. There is glue all over the table. It appears to be regular wood glue. Any suggestions on how to remove it without damaging anything?

[Brian Kerley]

Go get yourself a pack of razor blades and start scraping away. It's the easiest way to clean up a top.

[John Towns]

I would think a paint scrapper might do the trick. If you are concerned about scratching the top, try a plastic scrapper. Wood glue should probably just pop off from a metal top with a little persuasion.

John

[John Thompson]

I would think a paint scrapper might do the trick. If you are concerned about scratching the top, try a plastic scrapper. Wood glue should probably just pop off from a metal top with a little persuasion.

John

Yep...

Sarge..

[Joy Parker]

thanks for the help. Joy

[Peter Quinn]

Gentle heating with a hair dryer or paint stripper may help soften difficult to remove bits.

[Mark Berenbrok]

If it's regular yellow wood glue, rubbing alcohol will soften it. DAMHIKT.