Nova Chuck Cearance at lee Valley

[Gilbert Vega]

Just saw a notice on the other forum that Lee Valley has on clearance the Nova chucks and jaws sets.

http://www.leevalley.com/wood/page.aspx?c=2&p=58948&cat=1,44047&ap=1

[Chris Rolke]

thanks

just ordered a super nova 2 (to go along with my super nova )

[Kevin McPeek]

Man are trying to get us in trouble? I could use another one or more...

[Chris Barnett]

Any idea why these are being discontinued? Read here that NOVA production is moving to China or has it already done so?

[Scott Hubl]

My guess is LV may not be carrying them in the future?
OR they (Technatool) is discounting the few remaining New Zealand made inventory.

A friend called and confirmed that this inventory IS NZ made units and accessories and NOT the china made stuff.

Get em while you can. I grabbed a Titon with standard PowerGrip jaws and adaptor and a Step Jaw set.

[Steve Kubien]

Thanks for the heads up. I've been wanting another SN2 and some bowl jaws (and now they are on the way).

Steve Kubien

[Arlan Ten Kley]

Thanks! I needed another set of jaws.

[Brett Baldwin]

Excellent timing Gilbert, thanks. I was in need of a new chuck for the bigger lathe. I saved about $50 over what I was planning to buy.

[Kevin McPeek]

Well I ordered another SN2 bare and convinced my wife it was a great Valentines gift, good thing I already got her a spa day, so it was an easy sale.
Now I hope woodcraft has the right adapter since they have the 10% (15% earlybird) sale this weekend.

Edit; Looks like the special sale is not this weekend, oh well.
A little birdie told me that a Pinnacle insert will fit, anybody heard of that?

[Greg Just]

Teknatools are not even in the last catalog I got from them

[Bob Vallaster]

Gilbert,
I appreciate the pointer. That someday... order was placed today.

Bob V.

[Walter Mooney]

Do the NC jaws interchange with, or fit, the one-way talon chucks?

[Gilbert Vega]

Glad, I was able to help out.

When i saw the link on the other forum, I ran to the LOML and convinced her I needed another chuck (already have 6). She agreed to let me order a SN2. Well, I guess I got carried away and ended up ordering 2 SN2's and 1 titan chuck w/powergrip jaws. Now i have to tell her how much I spent. :o

[Kevin McPeek]

Hopefully she is more understanding than my wife. I'd be out turning a new doghouse to live in. I barely got by ordering one bare SN2. I didn't mention that it will be my 3rd, that may have been harder to get out of.

[Bill Bolen]

Darn! When you snooze you loose sure applies. Went for the sn2 body only and they are sold out now...Thanks for the link, I might be faster the next time!...Bill...

[Allen Neighbors]

Teknatool did outsource their manufacturing to China. There is a report on another forum about the comparison between the NZ made and Chinese Made SuperNova2. The report is favorable.
I bought a Nova Titan when CSUSA had them on a discontinuance sale. I ordered the Titan Powergrip jaws separately, and then they put the jaws on backorder. I've waited almost 4 months, now, but I finally have them on the way from Tim Geist.
I think the reason they are selling out is because it will be a long slow process of getting everything tooled up for each different chuck. However, the SN2s are already being made and shipped. The Titan and it's dedicated PowerGrip Jawset is on hold for now.... this according to Fan Huang, the Marketing Manager for Teknatool.

[Kevin McPeek]

Do the NC jaws interchange with, or fit, the one-way talon chucks?

I'm pretty sure they don't, somebody correct me if I'm wrong.

[Kevin McPeek]

A friend called and confirmed that this inventory IS NZ made units and accessories and NOT the china made stuff.

I got mine today and it is a Chinese made unit unless the NZ started the different machining of the grooves. From what I've read they are supposed to be "just as good" so we'll see how it compares to my others. Even my other 2 don't run the same, they also don't have the same travel. I have a piece that had a tenon that was held on one where the jaws were almost all the way closed, and I used the other chuck and it wouldn't close far enough to grip the tenon.
Either way I've got another chuck and I'm happy, and the Mrs got to see what she got me for valentines day. Unfortunately she caught on that I already had some of them and asked why I needed another one. :eek: Oops, didn't figure she'd notice.

[Scott Hubl]

WOW a Mod on another forum that I know personally said he called LV and they reassured him that all was NZ made stock, the 3 items I bought arrived a day early and all are stamped " Made in New Zealand"

Even the boxes say it.

The Titon Chuck has "MADE IN NZ"


Send it back if your unhappy, I would, thats why I added a few things to my cart to AVOID the china stuff.

In the future i'll add to my Oneway collection instead of buying the china stuff.

[Bill Bolen]

If you go for an insert for the Nova check out the pinnacle adapter at Woodcraft. $4.99 for the pinnacle 1" X 8 and $25 for the nova insert. Put the pinnacle in my new G3 and it fits right up and runs true! Wonder where I will spent that left ofer $21?..Bill..

[Lance Norris]

I got mine today and it is a Chinese made unit unless the NZ started the different machining of the grooves.

I got my Nova G3 Thursday from Lee Valley and its NZ not China.

[Chris Barnett]

My new Titan says made in NZ but the new Supernova2 says nothing, except made in NZ on only the box. Wonder what the older SN2 says? "'ave a gud day mate" :D

[tim mathis]

chris , my 1 year old super nova 2 say's made in
new zealand on the composite backing plate.
i received my titan with titan powergrips yesterday , it is very impressive.

[Greg Just]

I got my Nova G3 Thursday from Lee Valley and its NZ not China.

I purchased 2 sets of jaws and the boxes are marked "Made in NZ". There are no marks on the jaws thenselves

[Kevin McPeek]

Yeah, the box and backing plate on the chuck are both marked "Made in NZ" but the chuck has the different grooves as described on a few forums. I'll give the chuck a run through and decide then if I want to make any stink about it. I suspect it'll be fine, even though I hate to support the China outsource of any company from any country.

[Jason Clark2]

I don't believe the different placement of the grooves on the outside of the can be used to determine NZ/China origin. I bought 2 Supernova2 chucks from a woodcraft franchise location about 9 months ago, they were purchased within a week of each from the same store and they have different grooves. One also has "Lock" and an arrow to indicate the direction to close the jaws while the other has "In" and an arrow.

Jason

[Bill Blasic]

I have found out that you cannot tell the difference by the grooves on the outside. The only difference that you can tell them apart at this time is the sticker that comes on the outside of the box that says - Designed By Teknatool International Manufactured By Teknatool International PRC (Peoples Republic of China this is not written out but my take on PRC).

[Kevin McPeek]

Well I hope thats the case. I got the impression from your review on the Nova owners site that the grooves were different on Chinese and NZ versions. Jason's comment is the first I have heard about the different grooves on chucks from that long ago.
Maybe they had a design or machinist drawing change along the way..? Like I said, I'm happy just to have a new chuck.

[Chris Barnett]

Wanted to revise or append to my post to correct an error; non-metallic backing plate does read Made in New Zealand.