Mike Klafehn
02-07-2008, 9:43 AM
I needed a business card holder for a small sign I produced (we also do 4 color printing (laser and inkjet) I didn't want to buy 25 from my local supplier just to meet the minimums so I decided to build one. It really was pretty simple.
It is not the most elegant of holders, but it functions well when velcroed to a small sign. You must have some sort of plastic heater to bend the sides. This makes the holder look a little more like it came from a factory.
Anyway, thought the folks on the forum might get some use out of this.
The file is save in Corel X3. The details of construction are in the file.
I used a 45w Epilog @ 24s 100p to cut the Lucite (.08 thickness)
It is not the most elegant of holders, but it functions well when velcroed to a small sign. You must have some sort of plastic heater to bend the sides. This makes the holder look a little more like it came from a factory.
Anyway, thought the folks on the forum might get some use out of this.
The file is save in Corel X3. The details of construction are in the file.
I used a 45w Epilog @ 24s 100p to cut the Lucite (.08 thickness)