jason lambert
02-05-2008, 11:10 AM
Just picked up a Steel City drill press and need a table and Vice. I was thinking of the woodpecker table since it looks like it will drop right in and I can swap it with the stock table if I need to do metal, unlike the Rockler table where it bolts to the exsisting table.
What about a vice anyone have any sugestions will be used for 80% wood and some metal.
Correction Woodpecker is telling me that it bolts to the exsisting table, Is this correct? They where unsure how it attached. I would perfer a set up I could swap back and forth fast.
What about a vice anyone have any sugestions will be used for 80% wood and some metal.
Correction Woodpecker is telling me that it bolts to the exsisting table, Is this correct? They where unsure how it attached. I would perfer a set up I could swap back and forth fast.