Brady Gilbert
01-24-2008, 8:47 AM
A mentor for an upcoming hand tools class has recommended that I pick up a fret saw from Highland Hardware. I found this here (http://www.highlandwoodworking.com/index.asp?PageAction=VIEWPROD&ProdID=859). He also, however, recommended that I needed #5 blades for it. The replacement blades that Highland sales are listed as either 16, 22, or 32 tpi, but don't list by a designation similar to "#5."
EDIT: For Clarification, the blades are listed as follows:
16tpi/.022"
22tpi/.014"
32tpi/.011"
I emailed Highland but have not received a response.
Can anyone here help me understand the #5 designation, and if any of the blades listed may be satisfactory?
Thanks!
Brady
EDIT: For Clarification, the blades are listed as follows:
16tpi/.022"
22tpi/.014"
32tpi/.011"
I emailed Highland but have not received a response.
Can anyone here help me understand the #5 designation, and if any of the blades listed may be satisfactory?
Thanks!
Brady