Derek Jones
01-22-2008, 11:11 PM
I have been looking at getting set up to spray finishes and need to change my hose couplers to the type "V" (high flow). My questions are:
1. Can these types of fittings be used with tools other than HVLP, such as nailers?
2. Shouldn't I also replace the coupler on the compressor with a type "V"?
My original thought was to just replace all the fittings, but then I figured I better make sure.
Thanks for the help.
Derek
1. Can these types of fittings be used with tools other than HVLP, such as nailers?
2. Shouldn't I also replace the coupler on the compressor with a type "V"?
My original thought was to just replace all the fittings, but then I figured I better make sure.
Thanks for the help.
Derek