Joseph Wakefield
01-20-2008, 11:42 PM
Hi all;
Please pardon for my dumb question, but I am very frustrated with this task.
I try to tape cut the table leg which is 4x4 stock. I could not get it cut straight. Somehow I couuld not hold the tape jig tight to the table saw fence
guider. Any suggestions
Thank you in advance.
Joe
Please pardon for my dumb question, but I am very frustrated with this task.
I try to tape cut the table leg which is 4x4 stock. I could not get it cut straight. Somehow I couuld not hold the tape jig tight to the table saw fence
guider. Any suggestions
Thank you in advance.
Joe