View Full Version : homemade down draft/outfeed/assembly table
Dave Cohen
01-20-2008, 11:04 PM
Just finished this project, save $$ making one instead of buying a DDT,
was fun and interesting...I know its not beautiful to look at, but its very versatile....
http://picasaweb.google.com/alhenex/OutfeedDownDraftTable/photo#5157770894934479778
Made a slotted insert for DDT that swaps out with a melamine insert when I want to use it as an outfeed table.
Doug Hobkirk
01-20-2008, 11:34 PM
Dave - I like it - I'd like to see a pic showing how you hooked up the DC...
Billy Chambless
01-21-2008, 9:33 AM
Now that's a slick idea!
Dave Cohen
01-21-2008, 9:53 AM
Dave - I like it - I'd like to see a pic showing how you hooked up the DC...
DC hose goes into a tee at the bottom:
http://picasaweb.google.com/alhenex/OutfeedDownDraftTable/photo#5157770894934479778
and out to elbows that go into the side of the box high up (inside of dust ramps inside DDT):
http://picasaweb.google.com/alhenex/OutfeedDownDraftTable/photo#5157770907819381682
dust ramps in DDT:
http://picasaweb.google.com/alhenex/OutfeedDownDraftTable/photo#5157770929294218210
Larry LaRoque
01-21-2008, 10:16 AM
Dave,
Congrats on your outfeed/sanding/finishing table. Looks like you put a lot of thought into this and I have to confess I saw a thing or two that I may have to try in my shop.:rolleyes: I don't know about you but I get about as much enjoyment working on my shop as I do working on projects. Again good job.:)
David G Baker
01-21-2008, 10:48 AM
Dave,
It looks beautiful to me. Great work.
Bill Brady
01-21-2008, 5:23 PM
Nice job, saves space and mess.
John Schreiber
01-24-2008, 9:43 AM
This one goes in the notebook.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.