Joe Pelonio
01-19-2008, 7:48 PM
I did some more plaques for the bamboo people, paint filled using acrylic latex sprayed with mini HVLP gun.
I asked them to send me samples of their bamboo veneer, and have glued up a sign with it to see how it works. So far so good, it cut beautifully and didn't warp before clamping like some woods when glued down. It's 1/42, took me two passes to engrave out for it but probably could have done it in one with different settings. I'll post it when done if it turns out.
I asked them to send me samples of their bamboo veneer, and have glued up a sign with it to see how it works. So far so good, it cut beautifully and didn't warp before clamping like some woods when glued down. It's 1/42, took me two passes to engrave out for it but probably could have done it in one with different settings. I'll post it when done if it turns out.