keith ouellette
01-19-2008, 1:52 PM
I had started a thread about a deal i had found at supergrit.com on a 25ft 6in wide 100grit roll which i intended to cut down to 3in so it would fit my performax 16/32. It is on an E weight paper and can be found in the plain paper rolls section.
It just arrived today in time for me to use. I cut it and wrapped it and ran 3 36in by 15in panels through two times each. One of the panels got a full 1/32 (it was a mistake once started had to finish)
The paper worked fine. No tears or build up and it seems like it has plenty of grit left. Just thought I would pass it along.
It just arrived today in time for me to use. I cut it and wrapped it and ran 3 36in by 15in panels through two times each. One of the panels got a full 1/32 (it was a mistake once started had to finish)
The paper worked fine. No tears or build up and it seems like it has plenty of grit left. Just thought I would pass it along.